add intune to niri floating rule

fuzzel.ini

@@ -0,0 +1,120 @@
+# output=<not set>
+font=NotoSans Nerd Font
+# dpi-aware=auto
+# use-bold=no
+# prompt="> "
+# placeholder=
+# icon-theme=hicolor
+# icons-enabled=yes
+# hide-before-typing=no
+# fields=filename,name,generic
+# password-character=*
+# filter-desktop=no
+# match-mode=fzf
+# sort-result=yes
+# match-counter=no
+# delayed-filter-ms=300
+# delayed-filter-limit=20000
+# show-actions=no
+# terminal=$TERMINAL -e  # Note: you cannot actually use environment variables here
+# launch-prefix=<not set>
+# list-executables-in-path=no
+
+# anchor=center
+# x-margin=0
+# y-margin=0
+# lines=15
+width=80
+# tabs=8
+# horizontal-pad=40
+# vertical-pad=8
+# inner-pad=0
+
+# image-size-ratio=0.5
+
+# line-height=<use font metrics>
+# letter-spacing=0
+
+# layer=overlay
+# keyboard-focus=on-demand
+# exit-on-keyboard-focus-loss=yes
+
+# cache=<not set>
+
+# render-workers=<number of logical CPUs>
+# match-workers=<number of logical CPUs>
+
+# import catppuccin
+include=~/.config/fuzzel/themes/catppuccin-macchiato/sky.ini
+
+[colors]
+# background=fdf6e3ff
+# text=657b83ff
+# prompt=586e75ff
+# placeholder=93a1a1ff
+# input=657b83ff
+# match=cb4b16ff
+# selection=eee8d5ff
+# selection-text=586e75ff
+# selection-match=cb4b16ff
+# counter=93a1a1ff
+# border=002b36ff
+
+[border]
+width=4
+# radius=10
+
+[dmenu]
+# mode=text  # text|index
+# exit-immediately-if-empty=no
+
+[key-bindings]
+# cancel=Escape Control+g Control+c Control+bracketleft
+# execute=Return KP_Enter Control+y
+# execute-or-next=Tab
+# execute-input=Shift+Return Shift+KP_Enter
+# cursor-left=Left Control+b
+# cursor-left-word=Control+Left Mod1+b
+# cursor-right=Right Control+f
+# cursor-right-word=Control+Right Mod1+f
+# cursor-home=Home Control+a
+# cursor-end=End Control+e
+# delete-prev=BackSpace Control+h
+# delete-prev-word=Mod1+BackSpace Control+BackSpace Control+w
+# delete-line-backward=Control+u
+# delete-next=Delete KP_Delete Control+d
+# delete-next-word=Mod1+d Control+Delete Control+KP_Delete
+# delete-line-forward=Control+k
+# prev=Up Control+p
+# prev-with-wrap=ISO_Left_Tab
+# prev-page=Page_Up KP_Page_Up
+# next=Down Control+n
+# next-with-wrap=none
+# next-page=Page_Down KP_Page_Down
+# expunge=Shift+Delete
+# clipboard-paste=Control+v XF86Paste
+# primary-paste=Shift+Insert Shift+KP_Insert
+
+# custom-N: *dmenu mode only*. Like execute, but with a non-zero
+# exit-code; custom-1 exits with code 10, custom-2 with 11, custom-3
+# with 12, and so on.
+
+# custom-1=Mod1+1
+# custom-2=Mod1+2
+# custom-3=Mod1+3
+# custom-4=Mod1+4
+# custom-5=Mod1+5
+# custom-6=Mod1+6
+# custom-7=Mod1+7
+# custom-8=Mod1+8
+# custom-9=Mod1+9
+# custom-10=Mod1+0
+# custom-11=Mod1+exclam
+# custom-12=Mod1+at
+# custom-13=Mod1+numbersign
+# custom-14=Mod1+dollar
+# custom-15=Mod1+percent
+# custom-16=Mod1+dead_circumflex
+# custom-17=Mod1+ampersand
+# custom-18=Mod1+asterix
+# custom-19=Mod1+parentleft

fuzzel/fuzzel.ini

@@ -0,0 +1,120 @@
+# output=<not set>
+font=NotoSans Nerd Font
+# dpi-aware=auto
+# use-bold=no
+# prompt="> "
+# placeholder=
+# icon-theme=hicolor
+# icons-enabled=yes
+# hide-before-typing=no
+# fields=filename,name,generic
+# password-character=*
+# filter-desktop=no
+# match-mode=fzf
+# sort-result=yes
+# match-counter=no
+# delayed-filter-ms=300
+# delayed-filter-limit=20000
+# show-actions=no
+# terminal=$TERMINAL -e  # Note: you cannot actually use environment variables here
+# launch-prefix=<not set>
+# list-executables-in-path=no
+
+# anchor=center
+# x-margin=0
+# y-margin=0
+# lines=15
+width=80
+# tabs=8
+# horizontal-pad=40
+# vertical-pad=8
+# inner-pad=0
+
+# image-size-ratio=0.5
+
+# line-height=<use font metrics>
+# letter-spacing=0
+
+# layer=overlay
+# keyboard-focus=on-demand
+# exit-on-keyboard-focus-loss=yes
+
+# cache=<not set>
+
+# render-workers=<number of logical CPUs>
+# match-workers=<number of logical CPUs>
+
+# import catppuccin
+include=~/.config/fuzzel/themes/catppuccin-macchiato/sky.ini
+
+[colors]
+# background=fdf6e3ff
+# text=657b83ff
+# prompt=586e75ff
+# placeholder=93a1a1ff
+# input=657b83ff
+# match=cb4b16ff
+# selection=eee8d5ff
+# selection-text=586e75ff
+# selection-match=cb4b16ff
+# counter=93a1a1ff
+# border=002b36ff
+
+[border]
+width=4
+# radius=10
+
+[dmenu]
+# mode=text  # text|index
+# exit-immediately-if-empty=no
+
+[key-bindings]
+# cancel=Escape Control+g Control+c Control+bracketleft
+# execute=Return KP_Enter Control+y
+# execute-or-next=Tab
+# execute-input=Shift+Return Shift+KP_Enter
+# cursor-left=Left Control+b
+# cursor-left-word=Control+Left Mod1+b
+# cursor-right=Right Control+f
+# cursor-right-word=Control+Right Mod1+f
+# cursor-home=Home Control+a
+# cursor-end=End Control+e
+# delete-prev=BackSpace Control+h
+# delete-prev-word=Mod1+BackSpace Control+BackSpace Control+w
+# delete-line-backward=Control+u
+# delete-next=Delete KP_Delete Control+d
+# delete-next-word=Mod1+d Control+Delete Control+KP_Delete
+# delete-line-forward=Control+k
+# prev=Up Control+p
+# prev-with-wrap=ISO_Left_Tab
+# prev-page=Page_Up KP_Page_Up
+# next=Down Control+n
+# next-with-wrap=none
+# next-page=Page_Down KP_Page_Down
+# expunge=Shift+Delete
+# clipboard-paste=Control+v XF86Paste
+# primary-paste=Shift+Insert Shift+KP_Insert
+
+# custom-N: *dmenu mode only*. Like execute, but with a non-zero
+# exit-code; custom-1 exits with code 10, custom-2 with 11, custom-3
+# with 12, and so on.
+
+# custom-1=Mod1+1
+# custom-2=Mod1+2
+# custom-3=Mod1+3
+# custom-4=Mod1+4
+# custom-5=Mod1+5
+# custom-6=Mod1+6
+# custom-7=Mod1+7
+# custom-8=Mod1+8
+# custom-9=Mod1+9
+# custom-10=Mod1+0
+# custom-11=Mod1+exclam
+# custom-12=Mod1+at
+# custom-13=Mod1+numbersign
+# custom-14=Mod1+dollar
+# custom-15=Mod1+percent
+# custom-16=Mod1+dead_circumflex
+# custom-17=Mod1+ampersand
+# custom-18=Mod1+asterix
+# custom-19=Mod1+parentleft

fuzzel/themes/catppuccin-frappe/blue.ini

@@ -0,0 +1,12 @@
+[colors]
+background=303446dd
+text=c6d0f5ff
+prompt=b5bfe2ff
+placeholder=838ba7ff
+input=c6d0f5ff
+match=8caaeeff
+selection=626880ff
+selection-text=c6d0f5ff
+selection-match=8caaeeff
+counter=838ba7ff
+border=8caaeeff

fuzzel/themes/catppuccin-frappe/flamingo.ini

@@ -0,0 +1,12 @@
+[colors]
+background=303446dd
+text=c6d0f5ff
+prompt=b5bfe2ff
+placeholder=838ba7ff
+input=c6d0f5ff
+match=eebebeff
+selection=626880ff
+selection-text=c6d0f5ff
+selection-match=eebebeff
+counter=838ba7ff
+border=eebebeff

fuzzel/themes/catppuccin-frappe/green.ini

@@ -0,0 +1,12 @@
+[colors]
+background=303446dd
+text=c6d0f5ff
+prompt=b5bfe2ff
+placeholder=838ba7ff
+input=c6d0f5ff
+match=a6d189ff
+selection=626880ff
+selection-text=c6d0f5ff
+selection-match=a6d189ff
+counter=838ba7ff
+border=a6d189ff

fuzzel/themes/catppuccin-frappe/lavender.ini

@@ -0,0 +1,12 @@
+[colors]
+background=303446dd
+text=c6d0f5ff
+prompt=b5bfe2ff
+placeholder=838ba7ff
+input=c6d0f5ff
+match=babbf1ff
+selection=626880ff
+selection-text=c6d0f5ff
+selection-match=babbf1ff
+counter=838ba7ff
+border=babbf1ff

fuzzel/themes/catppuccin-frappe/maroon.ini

@@ -0,0 +1,12 @@
+[colors]
+background=303446dd
+text=c6d0f5ff
+prompt=b5bfe2ff
+placeholder=838ba7ff
+input=c6d0f5ff
+match=ea999cff
+selection=626880ff
+selection-text=c6d0f5ff
+selection-match=ea999cff
+counter=838ba7ff
+border=ea999cff

fuzzel/themes/catppuccin-frappe/mauve.ini

@@ -0,0 +1,12 @@
+[colors]
+background=303446dd
+text=c6d0f5ff
+prompt=b5bfe2ff
+placeholder=838ba7ff
+input=c6d0f5ff
+match=ca9ee6ff
+selection=626880ff
+selection-text=c6d0f5ff
+selection-match=ca9ee6ff
+counter=838ba7ff
+border=ca9ee6ff

fuzzel/themes/catppuccin-frappe/peach.ini

@@ -0,0 +1,12 @@
+[colors]
+background=303446dd
+text=c6d0f5ff
+prompt=b5bfe2ff
+placeholder=838ba7ff
+input=c6d0f5ff
+match=ef9f76ff
+selection=626880ff
+selection-text=c6d0f5ff
+selection-match=ef9f76ff
+counter=838ba7ff
+border=ef9f76ff

fuzzel/themes/catppuccin-frappe/pink.ini

@@ -0,0 +1,12 @@
+[colors]
+background=303446dd
+text=c6d0f5ff
+prompt=b5bfe2ff
+placeholder=838ba7ff
+input=c6d0f5ff
+match=f4b8e4ff
+selection=626880ff
+selection-text=c6d0f5ff
+selection-match=f4b8e4ff
+counter=838ba7ff
+border=f4b8e4ff

fuzzel/themes/catppuccin-frappe/red.ini

@@ -0,0 +1,12 @@
+[colors]
+background=303446dd
+text=c6d0f5ff
+prompt=b5bfe2ff
+placeholder=838ba7ff
+input=c6d0f5ff
+match=e78284ff
+selection=626880ff
+selection-text=c6d0f5ff
+selection-match=e78284ff
+counter=838ba7ff
+border=e78284ff

fuzzel/themes/catppuccin-frappe/rosewater.ini

@@ -0,0 +1,12 @@
+[colors]
+background=303446dd
+text=c6d0f5ff
+prompt=b5bfe2ff
+placeholder=838ba7ff
+input=c6d0f5ff
+match=f2d5cfff
+selection=626880ff
+selection-text=c6d0f5ff
+selection-match=f2d5cfff
+counter=838ba7ff
+border=f2d5cfff

fuzzel/themes/catppuccin-frappe/sapphire.ini

@@ -0,0 +1,12 @@
+[colors]
+background=303446dd
+text=c6d0f5ff
+prompt=b5bfe2ff
+placeholder=838ba7ff
+input=c6d0f5ff
+match=85c1dcff
+selection=626880ff
+selection-text=c6d0f5ff
+selection-match=85c1dcff
+counter=838ba7ff
+border=85c1dcff

fuzzel/themes/catppuccin-frappe/sky.ini

@@ -0,0 +1,12 @@
+[colors]
+background=303446dd
+text=c6d0f5ff
+prompt=b5bfe2ff
+placeholder=838ba7ff
+input=c6d0f5ff
+match=99d1dbff
+selection=626880ff
+selection-text=c6d0f5ff
+selection-match=99d1dbff
+counter=838ba7ff
+border=99d1dbff

fuzzel/themes/catppuccin-frappe/teal.ini

@@ -0,0 +1,12 @@
+[colors]
+background=303446dd
+text=c6d0f5ff
+prompt=b5bfe2ff
+placeholder=838ba7ff
+input=c6d0f5ff
+match=81c8beff
+selection=626880ff
+selection-text=c6d0f5ff
+selection-match=81c8beff
+counter=838ba7ff
+border=81c8beff

fuzzel/themes/catppuccin-frappe/yellow.ini

@@ -0,0 +1,12 @@
+[colors]
+background=303446dd
+text=c6d0f5ff
+prompt=b5bfe2ff
+placeholder=838ba7ff
+input=c6d0f5ff
+match=e5c890ff
+selection=626880ff
+selection-text=c6d0f5ff
+selection-match=e5c890ff
+counter=838ba7ff
+border=e5c890ff

fuzzel/themes/catppuccin-latte/blue.ini

@@ -0,0 +1,12 @@
+[colors]
+background=eff1f5dd
+text=4c4f69ff
+prompt=5c5f77ff
+placeholder=8c8fa1ff
+input=4c4f69ff
+match=1e66f5ff
+selection=acb0beff
+selection-text=4c4f69ff
+selection-match=1e66f5ff
+counter=8c8fa1ff
+border=1e66f5ff

fuzzel/themes/catppuccin-latte/flamingo.ini

@@ -0,0 +1,12 @@
+[colors]
+background=eff1f5dd
+text=4c4f69ff
+prompt=5c5f77ff
+placeholder=8c8fa1ff
+input=4c4f69ff
+match=dd7878ff
+selection=acb0beff
+selection-text=4c4f69ff
+selection-match=dd7878ff
+counter=8c8fa1ff
+border=dd7878ff

fuzzel/themes/catppuccin-latte/green.ini

@@ -0,0 +1,12 @@
+[colors]
+background=eff1f5dd
+text=4c4f69ff
+prompt=5c5f77ff
+placeholder=8c8fa1ff
+input=4c4f69ff
+match=40a02bff
+selection=acb0beff
+selection-text=4c4f69ff
+selection-match=40a02bff
+counter=8c8fa1ff
+border=40a02bff

fuzzel/themes/catppuccin-latte/lavender.ini

@@ -0,0 +1,12 @@
+[colors]
+background=eff1f5dd
+text=4c4f69ff
+prompt=5c5f77ff
+placeholder=8c8fa1ff
+input=4c4f69ff
+match=7287fdff
+selection=acb0beff
+selection-text=4c4f69ff
+selection-match=7287fdff
+counter=8c8fa1ff
+border=7287fdff

fuzzel/themes/catppuccin-latte/maroon.ini

@@ -0,0 +1,12 @@
+[colors]
+background=eff1f5dd
+text=4c4f69ff
+prompt=5c5f77ff
+placeholder=8c8fa1ff
+input=4c4f69ff
+match=e64553ff
+selection=acb0beff
+selection-text=4c4f69ff
+selection-match=e64553ff
+counter=8c8fa1ff
+border=e64553ff

fuzzel/themes/catppuccin-latte/mauve.ini

@@ -0,0 +1,12 @@
+[colors]
+background=eff1f5dd
+text=4c4f69ff
+prompt=5c5f77ff
+placeholder=8c8fa1ff
+input=4c4f69ff
+match=8839efff
+selection=acb0beff
+selection-text=4c4f69ff
+selection-match=8839efff
+counter=8c8fa1ff
+border=8839efff

fuzzel/themes/catppuccin-latte/peach.ini

@@ -0,0 +1,12 @@
+[colors]
+background=eff1f5dd
+text=4c4f69ff
+prompt=5c5f77ff
+placeholder=8c8fa1ff
+input=4c4f69ff
+match=fe640bff
+selection=acb0beff
+selection-text=4c4f69ff
+selection-match=fe640bff
+counter=8c8fa1ff
+border=fe640bff

fuzzel/themes/catppuccin-latte/pink.ini

@@ -0,0 +1,12 @@
+[colors]
+background=eff1f5dd
+text=4c4f69ff
+prompt=5c5f77ff
+placeholder=8c8fa1ff
+input=4c4f69ff
+match=ea76cbff
+selection=acb0beff
+selection-text=4c4f69ff
+selection-match=ea76cbff
+counter=8c8fa1ff
+border=ea76cbff

fuzzel/themes/catppuccin-latte/red.ini

@@ -0,0 +1,12 @@
+[colors]
+background=eff1f5dd
+text=4c4f69ff
+prompt=5c5f77ff
+placeholder=8c8fa1ff
+input=4c4f69ff
+match=d20f39ff
+selection=acb0beff
+selection-text=4c4f69ff
+selection-match=d20f39ff
+counter=8c8fa1ff
+border=d20f39ff

fuzzel/themes/catppuccin-latte/rosewater.ini

@@ -0,0 +1,12 @@
+[colors]
+background=eff1f5dd
+text=4c4f69ff
+prompt=5c5f77ff
+placeholder=8c8fa1ff
+input=4c4f69ff
+match=dc8a78ff
+selection=acb0beff
+selection-text=4c4f69ff
+selection-match=dc8a78ff
+counter=8c8fa1ff
+border=dc8a78ff

fuzzel/themes/catppuccin-latte/sapphire.ini

@@ -0,0 +1,12 @@
+[colors]
+background=eff1f5dd
+text=4c4f69ff
+prompt=5c5f77ff
+placeholder=8c8fa1ff
+input=4c4f69ff
+match=209fb5ff
+selection=acb0beff
+selection-text=4c4f69ff
+selection-match=209fb5ff
+counter=8c8fa1ff
+border=209fb5ff

fuzzel/themes/catppuccin-latte/sky.ini

@@ -0,0 +1,12 @@
+[colors]
+background=eff1f5dd
+text=4c4f69ff
+prompt=5c5f77ff
+placeholder=8c8fa1ff
+input=4c4f69ff
+match=04a5e5ff
+selection=acb0beff
+selection-text=4c4f69ff
+selection-match=04a5e5ff
+counter=8c8fa1ff
+border=04a5e5ff

fuzzel/themes/catppuccin-latte/teal.ini

@@ -0,0 +1,12 @@
+[colors]
+background=eff1f5dd
+text=4c4f69ff
+prompt=5c5f77ff
+placeholder=8c8fa1ff
+input=4c4f69ff
+match=179299ff
+selection=acb0beff
+selection-text=4c4f69ff
+selection-match=179299ff
+counter=8c8fa1ff
+border=179299ff

fuzzel/themes/catppuccin-latte/yellow.ini

@@ -0,0 +1,12 @@
+[colors]
+background=eff1f5dd
+text=4c4f69ff
+prompt=5c5f77ff
+placeholder=8c8fa1ff
+input=4c4f69ff
+match=df8e1dff
+selection=acb0beff
+selection-text=4c4f69ff
+selection-match=df8e1dff
+counter=8c8fa1ff
+border=df8e1dff

fuzzel/themes/catppuccin-macchiato/blue.ini

@@ -0,0 +1,12 @@
+[colors]
+background=24273add
+text=cad3f5ff
+prompt=b8c0e0ff
+placeholder=8087a2ff
+input=cad3f5ff
+match=8aadf4ff
+selection=5b6078ff
+selection-text=cad3f5ff
+selection-match=8aadf4ff
+counter=8087a2ff
+border=8aadf4ff

fuzzel/themes/catppuccin-macchiato/flamingo.ini

@@ -0,0 +1,12 @@
+[colors]
+background=24273add
+text=cad3f5ff
+prompt=b8c0e0ff
+placeholder=8087a2ff
+input=cad3f5ff
+match=f0c6c6ff
+selection=5b6078ff
+selection-text=cad3f5ff
+selection-match=f0c6c6ff
+counter=8087a2ff
+border=f0c6c6ff

fuzzel/themes/catppuccin-macchiato/green.ini

@@ -0,0 +1,12 @@
+[colors]
+background=24273add
+text=cad3f5ff
+prompt=b8c0e0ff
+placeholder=8087a2ff
+input=cad3f5ff
+match=a6da95ff
+selection=5b6078ff
+selection-text=cad3f5ff
+selection-match=a6da95ff
+counter=8087a2ff
+border=a6da95ff

fuzzel/themes/catppuccin-macchiato/lavender.ini

@@ -0,0 +1,12 @@
+[colors]
+background=24273add
+text=cad3f5ff
+prompt=b8c0e0ff
+placeholder=8087a2ff
+input=cad3f5ff
+match=b7bdf8ff
+selection=5b6078ff
+selection-text=cad3f5ff
+selection-match=b7bdf8ff
+counter=8087a2ff
+border=b7bdf8ff

fuzzel/themes/catppuccin-macchiato/maroon.ini

@@ -0,0 +1,12 @@
+[colors]
+background=24273add
+text=cad3f5ff
+prompt=b8c0e0ff
+placeholder=8087a2ff
+input=cad3f5ff
+match=ee99a0ff
+selection=5b6078ff
+selection-text=cad3f5ff
+selection-match=ee99a0ff
+counter=8087a2ff
+border=ee99a0ff

fuzzel/themes/catppuccin-macchiato/mauve.ini

@@ -0,0 +1,12 @@
+[colors]
+background=24273add
+text=cad3f5ff
+prompt=b8c0e0ff
+placeholder=8087a2ff
+input=cad3f5ff
+match=c6a0f6ff
+selection=5b6078ff
+selection-text=cad3f5ff
+selection-match=c6a0f6ff
+counter=8087a2ff
+border=c6a0f6ff

fuzzel/themes/catppuccin-macchiato/peach.ini

@@ -0,0 +1,12 @@
+[colors]
+background=24273add
+text=cad3f5ff
+prompt=b8c0e0ff
+placeholder=8087a2ff
+input=cad3f5ff
+match=f5a97fff
+selection=5b6078ff
+selection-text=cad3f5ff
+selection-match=f5a97fff
+counter=8087a2ff
+border=f5a97fff

fuzzel/themes/catppuccin-macchiato/pink.ini

@@ -0,0 +1,12 @@
+[colors]
+background=24273add
+text=cad3f5ff
+prompt=b8c0e0ff
+placeholder=8087a2ff
+input=cad3f5ff
+match=f5bde6ff
+selection=5b6078ff
+selection-text=cad3f5ff
+selection-match=f5bde6ff
+counter=8087a2ff
+border=f5bde6ff

fuzzel/themes/catppuccin-macchiato/red.ini

@@ -0,0 +1,12 @@
+[colors]
+background=24273add
+text=cad3f5ff
+prompt=b8c0e0ff
+placeholder=8087a2ff
+input=cad3f5ff
+match=ed8796ff
+selection=5b6078ff
+selection-text=cad3f5ff
+selection-match=ed8796ff
+counter=8087a2ff
+border=ed8796ff

fuzzel/themes/catppuccin-macchiato/rosewater.ini

@@ -0,0 +1,12 @@
+[colors]
+background=24273add
+text=cad3f5ff
+prompt=b8c0e0ff
+placeholder=8087a2ff
+input=cad3f5ff
+match=f4dbd6ff
+selection=5b6078ff
+selection-text=cad3f5ff
+selection-match=f4dbd6ff
+counter=8087a2ff
+border=f4dbd6ff

fuzzel/themes/catppuccin-macchiato/sapphire.ini

@@ -0,0 +1,12 @@
+[colors]
+background=24273add
+text=cad3f5ff
+prompt=b8c0e0ff
+placeholder=8087a2ff
+input=cad3f5ff
+match=7dc4e4ff
+selection=5b6078ff
+selection-text=cad3f5ff
+selection-match=7dc4e4ff
+counter=8087a2ff
+border=7dc4e4ff

fuzzel/themes/catppuccin-macchiato/sky.ini

@@ -0,0 +1,12 @@
+[colors]
+background=24273add
+text=cad3f5ff
+prompt=b8c0e0ff
+placeholder=8087a2ff
+input=cad3f5ff
+match=91d7e3ff
+selection=5b6078ff
+selection-text=cad3f5ff
+selection-match=91d7e3ff
+counter=8087a2ff
+border=91d7e3ff

fuzzel/themes/catppuccin-macchiato/teal.ini

@@ -0,0 +1,12 @@
+[colors]
+background=24273add
+text=cad3f5ff
+prompt=b8c0e0ff
+placeholder=8087a2ff
+input=cad3f5ff
+match=8bd5caff
+selection=5b6078ff
+selection-text=cad3f5ff
+selection-match=8bd5caff
+counter=8087a2ff
+border=8bd5caff

fuzzel/themes/catppuccin-macchiato/yellow.ini

@@ -0,0 +1,12 @@
+[colors]
+background=24273add
+text=cad3f5ff
+prompt=b8c0e0ff
+placeholder=8087a2ff
+input=cad3f5ff
+match=eed49fff
+selection=5b6078ff
+selection-text=cad3f5ff
+selection-match=eed49fff
+counter=8087a2ff
+border=eed49fff

fuzzel/themes/catppuccin-mocha/blue.ini

@@ -0,0 +1,12 @@
+[colors]
+background=1e1e2edd
+text=cdd6f4ff
+prompt=bac2deff
+placeholder=7f849cff
+input=cdd6f4ff
+match=89b4faff
+selection=585b70ff
+selection-text=cdd6f4ff
+selection-match=89b4faff
+counter=7f849cff
+border=89b4faff

fuzzel/themes/catppuccin-mocha/flamingo.ini

@@ -0,0 +1,12 @@
+[colors]
+background=1e1e2edd
+text=cdd6f4ff
+prompt=bac2deff
+placeholder=7f849cff
+input=cdd6f4ff
+match=f2cdcdff
+selection=585b70ff
+selection-text=cdd6f4ff
+selection-match=f2cdcdff
+counter=7f849cff
+border=f2cdcdff

fuzzel/themes/catppuccin-mocha/green.ini

@@ -0,0 +1,12 @@
+[colors]
+background=1e1e2edd
+text=cdd6f4ff
+prompt=bac2deff
+placeholder=7f849cff
+input=cdd6f4ff
+match=a6e3a1ff
+selection=585b70ff
+selection-text=cdd6f4ff
+selection-match=a6e3a1ff
+counter=7f849cff
+border=a6e3a1ff

fuzzel/themes/catppuccin-mocha/lavender.ini

@@ -0,0 +1,12 @@
+[colors]
+background=1e1e2edd
+text=cdd6f4ff
+prompt=bac2deff
+placeholder=7f849cff
+input=cdd6f4ff
+match=b4befeff
+selection=585b70ff
+selection-text=cdd6f4ff
+selection-match=b4befeff
+counter=7f849cff
+border=b4befeff

fuzzel/themes/catppuccin-mocha/maroon.ini

@@ -0,0 +1,12 @@
+[colors]
+background=1e1e2edd
+text=cdd6f4ff
+prompt=bac2deff
+placeholder=7f849cff
+input=cdd6f4ff
+match=eba0acff
+selection=585b70ff
+selection-text=cdd6f4ff
+selection-match=eba0acff
+counter=7f849cff
+border=eba0acff

fuzzel/themes/catppuccin-mocha/mauve.ini

@@ -0,0 +1,12 @@
+[colors]
+background=1e1e2edd
+text=cdd6f4ff
+prompt=bac2deff
+placeholder=7f849cff
+input=cdd6f4ff
+match=cba6f7ff
+selection=585b70ff
+selection-text=cdd6f4ff
+selection-match=cba6f7ff
+counter=7f849cff
+border=cba6f7ff

fuzzel/themes/catppuccin-mocha/peach.ini

@@ -0,0 +1,12 @@
+[colors]
+background=1e1e2edd
+text=cdd6f4ff
+prompt=bac2deff
+placeholder=7f849cff
+input=cdd6f4ff
+match=fab387ff
+selection=585b70ff
+selection-text=cdd6f4ff
+selection-match=fab387ff
+counter=7f849cff
+border=fab387ff

fuzzel/themes/catppuccin-mocha/pink.ini

@@ -0,0 +1,12 @@
+[colors]
+background=1e1e2edd
+text=cdd6f4ff
+prompt=bac2deff
+placeholder=7f849cff
+input=cdd6f4ff
+match=f5c2e7ff
+selection=585b70ff
+selection-text=cdd6f4ff
+selection-match=f5c2e7ff
+counter=7f849cff
+border=f5c2e7ff

fuzzel/themes/catppuccin-mocha/red.ini

@@ -0,0 +1,12 @@
+[colors]
+background=1e1e2edd
+text=cdd6f4ff
+prompt=bac2deff
+placeholder=7f849cff
+input=cdd6f4ff
+match=f38ba8ff
+selection=585b70ff
+selection-text=cdd6f4ff
+selection-match=f38ba8ff
+counter=7f849cff
+border=f38ba8ff

fuzzel/themes/catppuccin-mocha/rosewater.ini

@@ -0,0 +1,12 @@
+[colors]
+background=1e1e2edd
+text=cdd6f4ff
+prompt=bac2deff
+placeholder=7f849cff
+input=cdd6f4ff
+match=f5e0dcff
+selection=585b70ff
+selection-text=cdd6f4ff
+selection-match=f5e0dcff
+counter=7f849cff
+border=f5e0dcff

fuzzel/themes/catppuccin-mocha/sapphire.ini

@@ -0,0 +1,12 @@
+[colors]
+background=1e1e2edd
+text=cdd6f4ff
+prompt=bac2deff
+placeholder=7f849cff
+input=cdd6f4ff
+match=74c7ecff
+selection=585b70ff
+selection-text=cdd6f4ff
+selection-match=74c7ecff
+counter=7f849cff
+border=74c7ecff

fuzzel/themes/catppuccin-mocha/sky.ini

@@ -0,0 +1,12 @@
+[colors]
+background=1e1e2edd
+text=cdd6f4ff
+prompt=bac2deff
+placeholder=7f849cff
+input=cdd6f4ff
+match=89dcebff
+selection=585b70ff
+selection-text=cdd6f4ff
+selection-match=89dcebff
+counter=7f849cff
+border=89dcebff

fuzzel/themes/catppuccin-mocha/teal.ini

@@ -0,0 +1,12 @@
+[colors]
+background=1e1e2edd
+text=cdd6f4ff
+prompt=bac2deff
+placeholder=7f849cff
+input=cdd6f4ff
+match=94e2d5ff
+selection=585b70ff
+selection-text=cdd6f4ff
+selection-match=94e2d5ff
+counter=7f849cff
+border=94e2d5ff

fuzzel/themes/catppuccin-mocha/yellow.ini

@@ -0,0 +1,12 @@
+[colors]
+background=1e1e2edd
+text=cdd6f4ff
+prompt=bac2deff
+placeholder=7f849cff
+input=cdd6f4ff
+match=f9e2afff
+selection=585b70ff
+selection-text=cdd6f4ff
+selection-match=f9e2afff
+counter=7f849cff
+border=f9e2afff

ghostty/config

@@ -0,0 +1,2 @@
+theme = catppuccin-macchiato
+background-opacity = 0.7

neovim/kickstart-old/.stylua.toml

@@ -0,0 +1,6 @@
+column_width = 160
+line_endings = "Unix"
+indent_type = "Spaces"
+indent_width = 2
+quote_style = "AutoPreferSingle"
+call_parentheses = "None"

neovim/kickstart-old/LICENSE.md

@@ -0,0 +1,19 @@
+MIT License
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

neovim/kickstart-old/README.md

@@ -0,0 +1,195 @@
+# kickstart.nvim
+
+https://github.com/kdheepak/kickstart.nvim/assets/1813121/f3ff9a2b-c31f-44df-a4fa-8a0d7b17cf7b
+
+### Introduction
+
+A starting point for Neovim that is:
+
+* Small
+* Single-file (with examples of moving to multi-file)
+* Documented
+* Modular
+
+This repo is meant to be used by **YOU** to begin your Neovim journey; remove the things you don't use and add what you miss.
+
+Kickstart.nvim targets *only* the latest ['stable'](https://github.com/neovim/neovim/releases/tag/stable) and latest ['nightly'](https://github.com/neovim/neovim/releases/tag/nightly) of Neovim. If you are experiencing issues, please make sure you have the latest versions.
+
+Distribution Alternatives:
+- [LazyVim](https://www.lazyvim.org/): A delightful distribution maintained by @folke (the author of lazy.nvim, the package manager used here)
+
+### Installation
+
+> **NOTE** 
+> [Backup](#FAQ) your previous configuration (if any exists)
+
+Requirements:
+* Make sure to review the readmes of the plugins if you are experiencing errors. In particular:
+  * [ripgrep](https://github.com/BurntSushi/ripgrep#installation) is required for multiple [telescope](https://github.com/nvim-telescope/telescope.nvim#suggested-dependencies) pickers.
+* See [Windows Installation](#Windows-Installation) if you have trouble with `telescope-fzf-native`
+
+Neovim's configurations are located under the following paths, depending on your OS:
+
+| OS | PATH |
+| :- | :--- |
+| Linux | `$XDG_CONFIG_HOME/nvim`, `~/.config/nvim` |
+| MacOS | `$XDG_CONFIG_HOME/nvim`, `~/.config/nvim` |
+| Windows (cmd)| `%userprofile%\AppData\Local\nvim\` |
+| Windows (powershell)| `$env:USERPROFILE\AppData\Local\nvim\` |
+
+Clone kickstart.nvim:
+
+```sh
+# on Linux and Mac
+git clone https://github.com/nvim-lua/kickstart.nvim.git "${XDG_CONFIG_HOME:-$HOME/.config}"/nvim
+```
+
+
+```
+# on Windows (cmd)
+git clone https://github.com/nvim-lua/kickstart.nvim.git %userprofile%\AppData\Local\nvim\ 
+```
+
+```
+# on Windows (powershell)
+git clone https://github.com/nvim-lua/kickstart.nvim.git $env:USERPROFILE\AppData\Local\nvim\ 
+```
+
+
+### Post Installation
+
+Start Neovim
+
+```sh
+nvim
+```
+
+The `Lazy` plugin manager will start automatically on the first run and install the configured plugins - as can be seen in the introduction video. After the installation is complete you can press `q` to close the `Lazy` UI and **you are ready to go**! Next time you run nvim `Lazy` will no longer show up.
+
+If you would prefer to hide this step and run the plugin sync from the command line, you can use:
+
+```sh
+nvim --headless "+Lazy! sync" +qa
+```
+
+### Recommended Steps
+
+[Fork](https://docs.github.com/en/get-started/quickstart/fork-a-repo) this repo (so that you have your own copy that you can modify) and then installing you can install to your machine using the methods above.
+
+> **NOTE**  
+> Your fork's url will be something like this: `https://github.com/<your_github_username>/kickstart.nvim.git`
+
+### Configuration And Extension
+
+* Inside of your copy, feel free to modify any file you like! It's your copy!
+* Feel free to change any of the default options in `init.lua` to better suit your needs.
+* For adding plugins, there are 3 primary options:
+  * Add new configuration in `lua/custom/plugins/*` files, which will be auto sourced using `lazy.nvim` (uncomment the line importing the `custom/plugins` directory in the `init.lua` file to enable this)
+  * Modify `init.lua` with additional plugins.
+  * Include the `lua/kickstart/plugins/*` files in your configuration.
+
+You can also merge updates/changes from the repo back into your fork, to keep up-to-date with any changes for the default configuration.
+
+#### Example: Adding an autopairs plugin
+
+In the file: `lua/custom/plugins/autopairs.lua`, add:
+
+```lua
+-- File: lua/custom/plugins/autopairs.lua
+
+return {
+  "windwp/nvim-autopairs",
+  -- Optional dependency
+  dependencies = { 'hrsh7th/nvim-cmp' },
+  config = function()
+    require("nvim-autopairs").setup {}
+    -- If you want to automatically add `(` after selecting a function or method
+    local cmp_autopairs = require('nvim-autopairs.completion.cmp')
+    local cmp = require('cmp')
+    cmp.event:on(
+      'confirm_done',
+      cmp_autopairs.on_confirm_done()
+    )
+  end,
+}
+```
+
+
+This will automatically install [windwp/nvim-autopairs](https://github.com/windwp/nvim-autopairs) and enable it on startup. For more information, see documentation for [lazy.nvim](https://github.com/folke/lazy.nvim).
+
+#### Example: Adding a file tree plugin
+
+In the file: `lua/custom/plugins/filetree.lua`, add:
+
+```lua
+-- Unless you are still migrating, remove the deprecated commands from v1.x
+vim.cmd([[ let g:neo_tree_remove_legacy_commands = 1 ]])
+
+return {
+  "nvim-neo-tree/neo-tree.nvim",
+  version = "*",
+  dependencies = {
+    "nvim-lua/plenary.nvim",
+    "nvim-tree/nvim-web-devicons", -- not strictly required, but recommended
+    "MunifTanjim/nui.nvim",
+  },
+  config = function ()
+    require('neo-tree').setup {}
+  end,
+}
+```
+
+This will install the tree plugin and add the command `:Neotree` for you. You can explore the documentation at [neo-tree.nvim](https://github.com/nvim-neo-tree/neo-tree.nvim) for more information.
+
+### Contribution
+
+Pull-requests are welcome. The goal of this repo is not to create a Neovim configuration framework, but to offer a starting template that shows, by example, available features in Neovim. Some things that will not be included:
+
+* Custom language server configuration (null-ls templates)
+* Theming beyond a default colorscheme necessary for LSP highlight groups
+
+Each PR, especially those which increase the line count, should have a description as to why the PR is necessary.
+
+### FAQ
+
+* What should I do if I already have a pre-existing neovim configuration?
+  * You should back it up, then delete all files associated with it.
+  * This includes your existing init.lua and the neovim files in `~/.local` which can be deleted with `rm -rf ~/.local/share/nvim/`
+  * You may also want to look at the [migration guide for lazy.nvim](https://github.com/folke/lazy.nvim#-migration-guide)
+* Can I keep my existing configuration in parallel to kickstart?
+  * Yes! You can use [NVIM_APPNAME](https://neovim.io/doc/user/starting.html#%24NVIM_APPNAME)`=nvim-NAME` to maintain multiple configurations. For example you can install the kickstart configuration in `~/.config/nvim-kickstart` and create a script `~/bin/nvim-kickstart`:
+    ```
+    #!/bin/sh
+    exec env NVIM_APPNAME=nvim-kickstart nvim "$@"
+    ```
+    When you run Neovim with `nvim-kickstart` it will use the alternative config directory and the matching local directory: `~/.local/share/nvim-kickstart`. You can apply this approach to any Neovim distribution that you would like to try out.
+* What if I want to "uninstall" this configuration:
+  * See [lazy.nvim uninstall](https://github.com/folke/lazy.nvim#-uninstalling) information
+* Are there any cool videos about this plugin?
+  * Current iteration of kickstart (coming soon)
+  * Here is one about the previous iteration of kickstart: [video introduction to Kickstart.nvim](https://youtu.be/stqUbv-5u2s). Note the install via init.lua no longer works as specified. Please follow the install instructions in this file instead as they're up to date.
+* Why is the kickstart `init.lua` a single file? Wouldn't it make sense to split it into multiple files?
+  * The main purpose of kickstart is to serve as a teaching tool and a reference
+    configuration that someone can easily `git clone` as a basis for their own.
+    As you progress in learning Neovim and Lua, you might consider splitting `init.lua`
+    into smaller parts. A fork of kickstart that does this while maintaining the exact
+    same functionality is available here:
+    * [kickstart-modular.nvim](https://github.com/dam9000/kickstart-modular.nvim)
+  * Discussions on this topic can be found here:
+    * [Restructure the configuration](https://github.com/nvim-lua/kickstart.nvim/issues/218)
+    * [Reorganize init.lua into a multi-file setup](https://github.com/nvim-lua/kickstart.nvim/pull/473)
+
+### Windows Installation
+
+Installation may require installing build tools, and updating the run command for `telescope-fzf-native`
+
+See `telescope-fzf-native` documentation for [more details](https://github.com/nvim-telescope/telescope-fzf-native.nvim#installation)
+
+This requires:
+
+- Install CMake, and the Microsoft C++ Build Tools on Windows
+
+```lua
+{'nvim-telescope/telescope-fzf-native.nvim', build = 'cmake -S. -Bbuild -DCMAKE_BUILD_TYPE=Release && cmake --build build --config Release && cmake --install build --prefix build' }
+```
+

neovim/kickstart-old/doc/kickstart.txt

@@ -0,0 +1,24 @@
+================================================================================
+INTRODUCTION                                                  *kickstart.nvim*
+
+Kickstart.nvim is a project to help you get started on your neovim journey.
+
+                                                            *kickstart-is-not*
+It is not:
+- Complete framework for every plugin under the sun
+- Place to add every plugin that could ever be useful
+
+                                                                *kickstart-is*
+It is:
+- Somewhere that has a good start for the most common "IDE" type features:
+    - autocompletion
+    - goto-definition
+    - find references
+    - fuzzy finding
+    - and hinting at what more can be done :)
+- A place to _kickstart_ your journey.
+    - You should fork this project and use/modify it so that it matches your
+      style and preferences. If you don't want to do that, there are probably
+      other projects that would fit much better for you (and that's great!)!
+
+ vim:tw=78:ts=8:ft=help:norl:

neovim/kickstart-old/init.lua

@@ -0,0 +1,645 @@
+--[[
+
+=====================================================================
+==================== READ THIS BEFORE CONTINUING ====================
+=====================================================================
+
+Kickstart.nvim is *not* a distribution.
+
+Kickstart.nvim is a template for your own configuration.
+  The goal is that you can read every line of code, top-to-bottom, understand
+  what your configuration is doing, and modify it to suit your needs.
+
+  Once you've done that, you should start exploring, configuring and tinkering to
+  explore Neovim!
+
+  If you don't know anything about Lua, I recommend taking some time to read through
+  a guide. One possible example:
+  - https://learnxinyminutes.com/docs/lua/
+
+
+  And then you can explore or search through `:help lua-guide`
+  - https://neovim.io/doc/user/lua-guide.html
+
+
+Kickstart Guide:
+
+I have left several `:help X` comments throughout the init.lua
+You should run that command and read that help section for more information.
+
+In addition, I have some `NOTE:` items throughout the file.
+These are for you, the reader to help understand what is happening. Feel free to delete
+them once you know what you're doing, but they should serve as a guide for when you
+are first encountering a few different constructs in your nvim config.
+
+I hope you enjoy your Neovim journey,
+- TJ
+
+P.S. You can delete this when you're done too. It's your config now :)
+--]]
+
+-- Set <space> as the leader key
+-- See `:help mapleader`
+--  NOTE: Must happen before plugins are required (otherwise wrong leader will be used)
+vim.g.mapleader = ' '
+vim.g.maplocalleader = ' '
+
+-- [[ Install `lazy.nvim` plugin manager ]]
+--    https://github.com/folke/lazy.nvim
+--    `:help lazy.nvim.txt` for more info
+local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim'
+if not vim.loop.fs_stat(lazypath) then
+  vim.fn.system {
+    'git',
+    'clone',
+    '--filter=blob:none',
+    'https://github.com/folke/lazy.nvim.git',
+    '--branch=stable', -- latest stable release
+    lazypath,
+  }
+end
+vim.opt.rtp:prepend(lazypath)
+
+-- [[ Configure plugins ]]
+-- NOTE: Here is where you install your plugins.
+--  You can configure plugins using the `config` key.
+--
+--  You can also configure plugins after the setup call,
+--    as they will be available in your neovim runtime.
+require('lazy').setup({
+  -- NOTE: First, some plugins that don't require any configuration
+
+  -- Git related plugins
+  'tpope/vim-fugitive',
+  'tpope/vim-rhubarb',
+
+  -- Detect tabstop and shiftwidth automatically
+  'tpope/vim-sleuth',
+
+  -- NOTE: This is where your plugins related to LSP can be installed.
+  --  The configuration is done below. Search for lspconfig to find it below.
+  {
+    -- LSP Configuration & Plugins
+    'neovim/nvim-lspconfig',
+    dependencies = {
+      -- Automatically install LSPs to stdpath for neovim
+      'williamboman/mason.nvim',
+      'williamboman/mason-lspconfig.nvim',
+
+      -- Useful status updates for LSP
+      -- NOTE: `opts = {}` is the same as calling `require('fidget').setup({})`
+      { 'j-hui/fidget.nvim', tag = 'legacy', opts = {} },
+
+      -- Additional lua configuration, makes nvim stuff amazing!
+      'folke/neodev.nvim',
+    },
+  },
+
+  {
+   -- Autocompletion
+    'hrsh7th/nvim-cmp',
+    dependencies = {
+      -- Snippet Engine & its associated nvim-cmp source
+      'L3MON4D3/LuaSnip',
+      'saadparwaiz1/cmp_luasnip',
+
+      -- Adds LSP completion capabilities
+      'hrsh7th/cmp-nvim-lsp',
+
+      -- Adds a number of user-friendly snippets
+      'rafamadriz/friendly-snippets',
+    },
+  },
+
+  -- Useful plugin to show you pending keybinds.
+  { 'folke/which-key.nvim', opts = {} },
+  {
+    -- Adds git related signs to the gutter, as well as utilities for managing changes
+    'lewis6991/gitsigns.nvim',
+    opts = {
+      -- See `:help gitsigns.txt`
+      signs = {
+        add = { text = '+' },
+        change = { text = '~' },
+        delete = { text = '_' },
+        topdelete = { text = '‾' },
+        changedelete = { text = '~' },
+      },
+      on_attach = function(bufnr)
+        vim.keymap.set('n', '<leader>hp', require('gitsigns').preview_hunk, { buffer = bufnr, desc = 'Preview git hunk' })
+
+        -- don't override the built-in and fugitive keymaps
+        local gs = package.loaded.gitsigns
+        vim.keymap.set({ 'n', 'v' }, ']c', function()
+          if vim.wo.diff then
+            return ']c'
+          end
+          vim.schedule(function()
+            gs.next_hunk()
+          end)
+          return '<Ignore>'
+        end, { expr = true, buffer = bufnr, desc = 'Jump to next hunk' })
+        vim.keymap.set({ 'n', 'v' }, '[c', function()
+          if vim.wo.diff then
+            return '[c'
+          end
+          vim.schedule(function()
+            gs.prev_hunk()
+          end)
+          return '<Ignore>'
+        end, { expr = true, buffer = bufnr, desc = 'Jump to previous hunk' })
+      end,
+    },
+  },
+
+--[[
+  {
+    -- Theme inspired by Atom
+    'navarasu/onedark.nvim',
+    priority = 1000,
+    config = function()
+      vim.cmd.colorscheme 'onedark'
+    end,
+  },
+--]]
+
+  {
+    --Catppuccin
+    'catppuccin/nvim',
+    name = 'catppuccin',
+    priority = 1000,
+  },
+
+  {
+    -- Set lualine as statusline
+    'nvim-lualine/lualine.nvim',
+    -- See `:help lualine.txt`
+    opts = {
+      options = {
+        icons_enabled = false,
+        theme = 'onedark',
+        component_separators = '|',
+        section_separators = '',
+      },
+    },
+  },
+
+  {
+    -- Add indentation guides even on blank lines
+    'lukas-reineke/indent-blankline.nvim',
+    -- Enable `lukas-reineke/indent-blankline.nvim`
+    -- See `:help ibl`
+    main = 'ibl',
+    opts = {},
+  },
+
+  -- "gc" to comment visual regions/lines
+  { 'numToStr/Comment.nvim', opts = {} },
+
+  -- Fuzzy Finder (files, lsp, etc)
+  {
+    'nvim-telescope/telescope.nvim',
+    branch = '0.1.x',
+    dependencies = {
+      'nvim-lua/plenary.nvim',
+      -- Fuzzy Finder Algorithm which requires local dependencies to be built.
+      -- Only load if `make` is available. Make sure you have the system
+      -- requirements installed.
+      {
+        'nvim-telescope/telescope-fzf-native.nvim',
+        -- NOTE: If you are having trouble with this installation,
+        --       refer to the README for telescope-fzf-native for more instructions.
+        build = 'make',
+        cond = function()
+          return vim.fn.executable 'make' == 1
+        end,
+      },
+    },
+  },
+
+  {
+    -- Highlight, edit, and navigate code
+    'nvim-treesitter/nvim-treesitter',
+    dependencies = {
+      'nvim-treesitter/nvim-treesitter-textobjects',
+    },
+    build = ':TSUpdate',
+  },
+
+  -- NOTE: Next Step on Your Neovim Journey: Add/Configure additional "plugins" for kickstart
+  --       These are some example plugins that I've included in the kickstart repository.
+  --       Uncomment any of the lines below to enable them.
+  -- require 'kickstart.plugins.autoformat',
+  -- require 'kickstart.plugins.debug',
+
+  -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua`
+  --    You can use this folder to prevent any conflicts with this init.lua if you're interested in keeping
+  --    up-to-date with whatever is in the kickstart repo.
+  --    Uncomment the following line and add your plugins to `lua/custom/plugins/*.lua` to get going.
+  --
+  --    For additional information see: https://github.com/folke/lazy.nvim#-structuring-your-plugins
+  { import = 'custom.plugins' },
+}, {})
+
+-- [[ Setting options ]]
+-- See `:help vim.o`
+-- NOTE: You can change these options as you wish!
+
+-- Set highlight on search
+vim.o.hlsearch = true
+vim.keymap.set("n", "<Esc>", "<cmd>nohlsearch<CR>")
+
+-- Set colorcolumn
+vim.opt.colorcolumn = "120"
+
+-- Make line numbers default
+vim.wo.number = true
+
+-- Enable mouse mode
+vim.o.mouse = 'a'
+
+-- Sync clipboard between OS and Neovim.
+--  Remove this option if you want your OS clipboard to remain independent.
+--  See `:help 'clipboard'`
+-- vim.o.clipboard = 'unnamedplus'
+--
+-- leader y and p yanks and pastes from the system clipboards
+vim.keymap.set('n', "<leader>y", "<registers>+y")
+
+-- Enable break indent
+vim.o.breakindent = true
+
+-- Save undo history
+vim.o.undofile = true
+
+-- Case-insensitive searching UNLESS \C or capital in search
+vim.o.ignorecase = true
+vim.o.smartcase = true
+
+-- Keep signcolumn on by default
+vim.wo.signcolumn = 'yes'
+
+-- Decrease update time
+vim.o.updatetime = 250
+vim.o.timeoutlen = 300
+
+-- Set completeopt to have a better completion experience
+vim.o.completeopt = 'menuone,noselect'
+
+-- NOTE: You should make sure your terminal supports this
+vim.o.termguicolors = true
+
+-- Set default shiftwidth
+vim.o.shiftwidth = 4
+vim.o.tabstop = 4
+
+-- Set cursor in insert mode
+vim.o.guicursor = "a:block"
+
+-- Set transparent background
+--[[ vim.cmd [[ 
+  hi Normal guibg=None 
+  hi NvimTreeNormal guibg=None 
+  hi NvimTreeNormalFloat guibg=None 
+  hi NvimTreeNormalNC guibg=None 
+]]--]] 
+
+-- [[ Basic Keymaps ]]
+
+-- Keymaps for better default experience
+-- See `:help vim.keymap.set()`
+vim.keymap.set({ 'n', 'v' }, '<Space>', '<Nop>', { silent = true })
+
+-- Remap for dealing with word wrap
+vim.keymap.set('n', 'k', "v:count == 0 ? 'gk' : 'k'", { expr = true, silent = true })
+vim.keymap.set('n', 'j', "v:count == 0 ? 'gj' : 'j'", { expr = true, silent = true })
+
+-- Diagnostic keymaps
+vim.keymap.set('n', '[d', vim.diagnostic.goto_prev, { desc = 'Go to previous diagnostic message' })
+vim.keymap.set('n', ']d', vim.diagnostic.goto_next, { desc = 'Go to next diagnostic message' })
+vim.keymap.set('n', '<leader>e', vim.diagnostic.open_float, { desc = 'Open floating diagnostic message' })
+vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagnostics list' })
+
+-- [[ Highlight on yank ]]
+-- See `:help vim.highlight.on_yank()`
+local highlight_group = vim.api.nvim_create_augroup('YankHighlight', { clear = true })
+vim.api.nvim_create_autocmd('TextYankPost', {
+  callback = function()
+    vim.highlight.on_yank()
+  end,
+  group = highlight_group,
+  pattern = '*',
+})
+
+-- [[ Configure Telescope ]]
+-- See `:help telescope` and `:help telescope.setup()`
+require('telescope').setup {
+  defaults = {
+    mappings = {
+      i = {
+        ['<C-u>'] = false,
+        ['<C-d>'] = false,
+      },
+    },
+  },
+}
+
+-- Enable telescope fzf native, if installed
+pcall(require('telescope').load_extension, 'fzf')
+
+-- Telescope live_grep in git root
+-- Function to find the git root directory based on the current buffer's path
+local function find_git_root()
+  -- Use the current buffer's path as the starting point for the git search
+  local current_file = vim.api.nvim_buf_get_name(0)
+  local current_dir
+  local cwd = vim.fn.getcwd()
+  -- If the buffer is not associated with a file, return nil
+  if current_file == "" then
+    current_dir = cwd
+  else
+    -- Extract the directory from the current file's path
+    current_dir = vim.fn.fnamemodify(current_file, ":h")
+  end
+
+  -- Find the Git root directory from the current file's path
+  local git_root = vim.fn.systemlist("git -C " .. vim.fn.escape(current_dir, " ") .. " rev-parse --show-toplevel")[1]
+  if vim.v.shell_error ~= 0 then
+    print("Not a git repository. Searching on current working directory")
+    return cwd
+  end
+  return git_root
+end
+
+-- Custom live_grep function to search in git root
+local function live_grep_git_root()
+  local git_root = find_git_root()
+  if git_root then
+    require('telescope.builtin').live_grep({
+      search_dirs = {git_root},
+    })
+  end
+end
+
+vim.api.nvim_create_user_command('LiveGrepGitRoot', live_grep_git_root, {})
+
+-- See `:help telescope.builtin`
+vim.keymap.set('n', '<leader>?', require('telescope.builtin').oldfiles, { desc = '[?] Find recently opened files' })
+vim.keymap.set('n', '<leader><space>', require('telescope.builtin').buffers, { desc = '[ ] Find existing buffers' })
+vim.keymap.set('n', '<leader>/', function()
+  -- You can pass additional configuration to telescope to change theme, layout, etc.
+  require('telescope.builtin').current_buffer_fuzzy_find(require('telescope.themes').get_dropdown {
+    winblend = 10,
+    previewer = false,
+  })
+end, { desc = '[/] Fuzzily search in current buffer' })
+
+vim.keymap.set('n', '<leader>gf', require('telescope.builtin').git_files, { desc = 'Search [G]it [F]iles' })
+vim.keymap.set('n', '<leader>sf', require('telescope.builtin').find_files, { desc = '[S]earch [F]iles' })
+vim.keymap.set('n', '<leader>sh', require('telescope.builtin').help_tags, { desc = '[S]earch [H]elp' })
+vim.keymap.set('n', '<leader>sw', require('telescope.builtin').grep_string, { desc = '[S]earch current [W]ord' })
+vim.keymap.set('n', '<leader>sg', require('telescope.builtin').live_grep, { desc = '[S]earch by [G]rep' })
+vim.keymap.set('n', '<leader>sG', ':LiveGrepGitRoot<cr>', { desc = '[S]earch by [G]rep on Git Root' })
+vim.keymap.set('n', '<leader>sd', require('telescope.builtin').diagnostics, { desc = '[S]earch [D]iagnostics' })
+vim.keymap.set('n', '<leader>sr', require('telescope.builtin').resume, { desc = '[S]earch [R]esume' })
+
+-- [[ Configure Treesitter ]]
+-- See `:help nvim-treesitter`
+-- Defer Treesitter setup after first render to improve startup time of 'nvim {filename}'
+vim.defer_fn(function()
+  require('nvim-treesitter.configs').setup {
+    -- Add languages to be installed here that you want installed for treesitter
+    ensure_installed = { 'c', 'cpp', 'go', 'lua', 'python', 'rust', 'tsx', 'javascript', 'typescript', 'vimdoc', 'vim', 'bash' },
+
+    -- Autoinstall languages that are not installed. Defaults to false (but you can change for yourself!)
+    auto_install = false,
+
+    highlight = { enable = true },
+    indent = { enable = true },
+    incremental_selection = {
+      enable = true,
+      keymaps = {
+        init_selection = '<c-space>',
+        node_incremental = '<c-space>',
+        scope_incremental = '<c-s>',
+        node_decremental = '<M-space>',
+      },
+    },
+    textobjects = {
+      select = {
+        enable = true,
+        lookahead = true, -- Automatically jump forward to textobj, similar to targets.vim
+        keymaps = {
+          -- You can use the capture groups defined in textobjects.scm
+          ['aa'] = '@parameter.outer',
+          ['ia'] = '@parameter.inner',
+          ['af'] = '@function.outer',
+          ['if'] = '@function.inner',
+          ['ac'] = '@class.outer',
+          ['ic'] = '@class.inner',
+        },
+      },
+      move = {
+        enable = true,
+        set_jumps = true, -- whether to set jumps in the jumplist
+        goto_next_start = {
+          [']m'] = '@function.outer',
+          [']]'] = '@class.outer',
+        },
+        goto_next_end = {
+          [']M'] = '@function.outer',
+          [']['] = '@class.outer',
+        },
+        goto_previous_start = {
+          ['[m'] = '@function.outer',
+          ['[['] = '@class.outer',
+        },
+        goto_previous_end = {
+          ['[M'] = '@function.outer',
+          ['[]'] = '@class.outer',
+        },
+      },
+      swap = {
+        enable = true,
+        swap_next = {
+          ['<leader>a'] = '@parameter.inner',
+        },
+        swap_previous = {
+          ['<leader>A'] = '@parameter.inner',
+        },
+      },
+    },
+  }
+end, 0)
+
+-- [[ Configure LSP ]]
+--  This function gets run when an LSP connects to a particular buffer.
+local on_attach = function(_, bufnr)
+  -- NOTE: Remember that lua is a real programming language, and as such it is possible
+  -- to define small helper and utility functions so you don't have to repeat yourself
+  -- many times.
+  --
+  -- In this case, we create a function that lets us more easily define mappings specific
+  -- for LSP related items. It sets the mode, buffer and description for us each time.
+  local nmap = function(keys, func, desc)
+    if desc then
+      desc = 'LSP: ' .. desc
+    end
+
+    vim.keymap.set('n', keys, func, { buffer = bufnr, desc = desc })
+  end
+
+  nmap('<leader>rn', vim.lsp.buf.rename, '[R]e[n]ame')
+  nmap('<leader>ca', vim.lsp.buf.code_action, '[C]ode [A]ction')
+
+  nmap('gd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition')
+  nmap('gr', require('telescope.builtin').lsp_references, '[G]oto [R]eferences')
+  nmap('gI', require('telescope.builtin').lsp_implementations, '[G]oto [I]mplementation')
+  nmap('<leader>D', require('telescope.builtin').lsp_type_definitions, 'Type [D]efinition')
+  nmap('<leader>ds', require('telescope.builtin').lsp_document_symbols, '[D]ocument [S]ymbols')
+  nmap('<leader>ws', require('telescope.builtin').lsp_dynamic_workspace_symbols, '[W]orkspace [S]ymbols')
+
+  -- See `:help K` for why this keymap
+  nmap('K', vim.lsp.buf.hover, 'Hover Documentation')
+  nmap('<C-k>', vim.lsp.buf.signature_help, 'Signature Documentation')
+
+  -- Lesser used LSP functionality
+  nmap('gD', vim.lsp.buf.declaration, '[G]oto [D]eclaration')
+  nmap('<leader>wa', vim.lsp.buf.add_workspace_folder, '[W]orkspace [A]dd Folder')
+  nmap('<leader>wr', vim.lsp.buf.remove_workspace_folder, '[W]orkspace [R]emove Folder')
+  nmap('<leader>wl', function()
+    print(vim.inspect(vim.lsp.buf.list_workspace_folders()))
+  end, '[W]orkspace [L]ist Folders')
+
+  -- Create a command `:Format` local to the LSP buffer
+  vim.api.nvim_buf_create_user_command(bufnr, 'Format', function(_)
+    vim.lsp.buf.format()
+  end, { desc = 'Format current buffer with LSP' })
+end
+
+-- document existing key chains
+require('which-key').register {
+  ['<leader>c'] = { name = '[C]ode', _ = 'which_key_ignore' },
+  ['<leader>d'] = { name = '[D]ocument', _ = 'which_key_ignore' },
+  ['<leader>g'] = { name = '[G]it', _ = 'which_key_ignore' },
+  ['<leader>h'] = { name = 'More git', _ = 'which_key_ignore' },
+  ['<leader>r'] = { name = '[R]ename', _ = 'which_key_ignore' },
+  ['<leader>s'] = { name = '[S]earch', _ = 'which_key_ignore' },
+  ['<leader>w'] = { name = '[W]orkspace', _ = 'which_key_ignore' },
+}
+
+-- mason-lspconfig requires that these setup functions are called in this order
+-- before setting up the servers.
+require('mason').setup()
+require('mason-lspconfig').setup()
+
+-- Enable the following language servers
+--  Feel free to add/remove any LSPs that you want here. They will automatically be installed.
+--
+--  Add any additional override configuration in the following tables. They will be passed to
+--  the `settings` field of the server config. You must look up that documentation yourself.
+--
+--  If you want to override the default filetypes that your language server will attach to you can
+--  define the property 'filetypes' to the map in question.
+local servers = {
+  -- clangd = {},
+  gopls = {},
+  pyright = {},
+  -- rust_analyzer = {},
+  -- tsserver = {},
+  -- html = { filetypes = { 'html', 'twig', 'hbs'} },
+
+  lua_ls = {
+    Lua = {
+      workspace = { checkThirdParty = false },
+      telemetry = { enable = false },
+    },
+  },
+}
+
+-- Setup neovim lua configuration
+require('neodev').setup()
+
+-- nvim-cmp supports additional completion capabilities, so broadcast that to servers
+local capabilities = vim.lsp.protocol.make_client_capabilities()
+capabilities = require('cmp_nvim_lsp').default_capabilities(capabilities)
+
+-- Ensure the servers above are installed
+local mason_lspconfig = require 'mason-lspconfig'
+
+mason_lspconfig.setup {
+  ensure_installed = vim.tbl_keys(servers),
+}
+
+mason_lspconfig.setup_handlers {
+  function(server_name)
+    require('lspconfig')[server_name].setup {
+      capabilities = capabilities,
+      on_attach = on_attach,
+      settings = servers[server_name],
+      filetypes = (servers[server_name] or {}).filetypes,
+    }
+  end,
+}
+
+-- [[ Configure nvim-cmp ]]
+-- See `:help cmp`
+local cmp = require 'cmp'
+local luasnip = require 'luasnip'
+require('luasnip.loaders.from_vscode').lazy_load()
+luasnip.config.setup {}
+
+cmp.setup {
+  snippet = {
+    expand = function(args)
+      luasnip.lsp_expand(args.body)
+    end,
+  },
+  mapping = cmp.mapping.preset.insert {
+    ['<C-n>'] = cmp.mapping.select_next_item(),
+    ['<C-p>'] = cmp.mapping.select_prev_item(),
+    ['<C-d>'] = cmp.mapping.scroll_docs(-4),
+    ['<C-f>'] = cmp.mapping.scroll_docs(4),
+    ['<C-Space>'] = cmp.mapping.complete {},
+    ['<CR>'] = cmp.mapping.confirm {
+      behavior = cmp.ConfirmBehavior.Replace,
+      select = true,
+    },
+    ['<Tab>'] = cmp.mapping(function(fallback)
+      if cmp.visible() then
+        cmp.select_next_item()
+      elseif luasnip.expand_or_locally_jumpable() then
+        luasnip.expand_or_jump()
+      else
+        fallback()
+      end
+    end, { 'i', 's' }),
+    ['<S-Tab>'] = cmp.mapping(function(fallback)
+      if cmp.visible() then
+        cmp.select_prev_item()
+      elseif luasnip.locally_jumpable(-1) then
+        luasnip.jump(-1)
+      else
+        fallback()
+      end
+    end, { 'i', 's' }),
+  },
+  sources = {
+    { name = 'nvim_lsp' },
+    { name = 'luasnip' },
+  },
+}
+
+-- set up catppuccin
+require('catppuccin').setup({
+  transparent_background = false,
+  integrations = {
+    nvimtree = true,
+    mason = true,
+    treesitter = true,
+  },
+})
+
+vim.cmd.colorscheme 'catppuccin-macchiato'
+-- The line beneath this is called `modeline`. See `:help modeline`
+-- vim: ts=2 sts=2 sw=2 et

neovim/kickstart-old/lua/custom/plugins/auto-save.lua

@@ -0,0 +1,9 @@
+return {
+  "okuuva/auto-save.nvim",
+  cmd = "ASToggle", -- optional for lazy loading on command
+  event = { "InsertLeave", "TextChanged" }, -- optional for lazy loading on trigger events
+  opts = {
+    -- your config goes here
+    -- or just leave it empty :)
+  },
+}

neovim/kickstart-old/lua/custom/plugins/flutter-tools.lua

@@ -0,0 +1,95 @@
+return {
+  'akinsho/flutter-tools.nvim',
+  lazy = false,
+  dependencies = {
+    'nvim-lua/plenary.nvim',
+    'stevearc/dressing.nvim', -- optional for vim.ui.select
+  },
+  config = function()
+    local flutterConfig = require("flutter-tools")
+
+    flutterConfig.setup {
+      ui = {
+        border = "rounded",
+        notification_style = 'native'
+      },
+      decorations = {
+        statusline = {
+          -- set to true to be able use the 'flutter_tools_decorations.app_version' in your statusline
+          -- this will show the current version of the flutter app from the pubspec.yaml file
+          app_version = true,
+          -- set to true to be able use the 'flutter_tools_decorations.device' in your statusline
+          -- this will show the currently running device if an application was started with a specific
+          -- device
+          device = true,
+          -- set to true to be able use the 'flutter_tools_decorations.project_config' in your statusline
+          -- this will show the currently selected project configuration
+          project_config = true,
+        }
+      },
+      debugger = {           -- integrate with nvim dap + install dart code debugger
+        enabled = false,
+        run_via_dap = false, -- use dap instead of a plenary job to run flutter apps
+        -- if empty dap will not stop on any exceptions, otherwise it will stop on those specified
+        -- see |:help dap.set_exception_breakpoints()| for more info
+        exception_breakpoints = {}
+      },
+      root_patterns = { ".git", "pubspec.yaml" }, -- patterns to find the root of your flutter project
+      fvm = true,                                 -- takes priority over path, uses <workspace>/.fvm/flutter_sdk if enabled
+      widget_guides = {
+        enabled = false,
+      },
+      closing_tags = {
+        highlight = "Comment", -- highlight for the closing tag
+        prefix = "//",         -- character to use for close tag e.g. > Widget
+        enabled = true         -- set to false to disable
+      },
+      dev_log = {
+        enabled = true,
+        notify_errors = false, -- if there is an error whilst running then notify the user
+        open_cmd = "tabedit",  -- command to us
+      },
+      dev_tools = {
+        autostart = false,         -- autostart devtools server if not detected
+        auto_open_browser = false, -- Automatically opens devtools in the browser
+      },
+      outline = {
+        open_cmd = "30vnew", -- command to use to open the outline buffer
+        auto_open = false    -- if true this will open the outline automatically when it is first populated
+      },
+      lsp = {
+        color = { -- show the derived colours for dart variables
+          enabled = false, -- whether or not to highlight color variables at all, only supported on flutter >= 2.10
+          background = false, -- highlight the background
+          background_color = nil, -- required, when background is transparent (i.e. background_color = { r = 19, g = 17, b = 24},)
+          foreground = false, -- highlight the foreground
+          virtual_text = true, -- show the highlight using virtual text
+          virtual_text_str = "■", -- the virtual text character to highlight
+        },
+        --- OR you can specify a function to deactivate or change or control how the config is created
+        capabilities = function(config)
+          config.specificThingIDontWant = false
+          return config
+        end,
+        analysisExcludedFolders = { "./fvm/" },
+        -- see the link below for details on each option:
+        -- https://github.com/dart-lang/sdk/blob/master/pkg/analysis_server/tool/lsp_spec/README.md#client-workspace-configuration
+        settings = {
+          showTodos = true,
+          completeFunctionCalls = true,
+          renameFilesWithClasses = "prompt", -- "always"
+          -- enableSnippets = true,
+          updateImportsOnRename = true,      -- Whether to update imports and other directives when files are renamed. Required for `FlutterRename` command.
+        }
+      }
+    }
+    -- [[ Configure Flutter tools]]
+    vim.keymap.set('n', '<leader>r', require('telescope').extensions.flutter.commands, { desc = 'Open command Flutter' })
+    vim.keymap.set('n', '<leader>br', function()
+      vim.cmd('20new')
+      vim.cmd('te fvm flutter packages pub run build_runner build --delete-conflicting-outputs')
+      vim.cmd('2sleep | normal G')
+    end)
+    -- '<Cmd>20new | te fvm flutter pub get && fvm flutter packages pub run build_runner build --delete-conflicting-outputs<CR> | $')
+  end
+};

neovim/kickstart-old/lua/custom/plugins/highlight-whitepace.lua

@@ -0,0 +1,6 @@
+return {
+    {
+        "lukoshkin/highlight-whitespace",
+        config=true,
+    }
+}

neovim/kickstart-old/lua/custom/plugins/init.lua

@@ -0,0 +1,5 @@
+-- You can add your own plugins here or in other files in this directory!
+--  I promise not to create any merge conflicts in this directory :)
+--
+-- See the kickstart.nvim README for more information
+return {}

neovim/kickstart-old/lua/custom/plugins/kiwi.lua

@@ -0,0 +1,20 @@
+return {
+  'serenevoid/kiwi.nvim',
+  dependencies = { 'nvim-lua/plenary.nvim' },
+  opts = {
+      {
+          name = "work",
+          path = "/home/danmac/Nextcloud/Notes/Work"
+      },
+      {
+          name = "personal",
+          path = "/home/danmac/Nextcloud/Notes/Personal"
+      }
+  },
+  keys = {
+      { "<leader>ww", ":lua require(\"kiwi\").open_wiki_index()<cr>", desc = "Open Wiki index" },
+      { "<leader>wp", ":lua require(\"kiwi\").open_wiki_index(\"personal\")<cr>", desc = "Open index of personal wiki" },
+      { "T", ":lua require(\"kiwi\").todo.toggle()<cr>", desc = "Toggle Markdown Task" }
+  },
+  lazy = true
+}

neovim/kickstart-old/lua/custom/plugins/markdown-preview.lua

@@ -0,0 +1,7 @@
+return {
+    "iamcco/markdown-preview.nvim",
+    cmd = { "MarkdownPreviewToggle", "MarkdownPreview", "MarkdownPreviewStop" },
+    ft = { "markdown" },
+    build = function() vim.fn["mkdp#util#install"]() end,
+    vim.keymap.set('n', '<leader>mp', ':MarkdownPreviewToggle<cr>', { desc = '[M]arkdown[P]reviewToggle' })
+}

neovim/kickstart-old/lua/custom/plugins/nvim-tree.lua

@@ -0,0 +1,13 @@
+return {
+  "nvim-tree/nvim-tree.lua",
+  version = "*",
+  lazy = false,
+  dependencies = {
+    "nvim-tree/nvim-web-devicons",
+  },
+  config = function()
+    require("nvim-tree").setup {}
+  end,
+  vim.keymap.set('n', '<leader>nt', ':NvimTreeToggle<cr>', { desc = '[N]vimTree [T]oggle' })
+}
+

neovim/kickstart-old/lua/custom/plugins/scratch.lua

@@ -0,0 +1,4 @@
+return {
+  "LintaoAmons/scratch.nvim",
+  event = "VeryLazy",
+}

neovim/kickstart-old/lua/custom/plugins/venv-selector.lua

@@ -0,0 +1,18 @@
+return {
+{
+  "linux-cultist/venv-selector.nvim",
+    dependencies = {
+      "neovim/nvim-lspconfig", 
+      "mfussenegger/nvim-dap", "mfussenegger/nvim-dap-python", --optional
+      { "nvim-telescope/telescope.nvim", branch = "0.1.x", dependencies = { "nvim-lua/plenary.nvim" } },
+    },
+  lazy = false,
+  branch = "regexp", -- This is the regexp branch, use this for the new version
+  config = function()
+      require("venv-selector").setup()
+    end,
+    keys = {
+      { ",v", "<cmd>VenvSelect<cr>" },
+    },
+  },
+}

neovim/kickstart-old/lua/custom/plugins/vim-tmux-navigator.lua

@@ -0,0 +1,8 @@
+return {
+  "christoomey/vim-tmux-navigator",
+  lazy = false,
+  vim.keymap.set('n', '<C-h>', ':TmuxNavigateLeft<cr>', { desc = 'Tmux Navigate Left' }),
+  vim.keymap.set('n', '<C-l>', ':TmuxNavigateRight<cr>', { desc = 'Tmux Navigate Right' }),
+  vim.keymap.set('n', '<C-j>', ':TmuxNavigateDown<cr>', { desc = 'Tmux Navigate Down' }),
+  vim.keymap.set('n', '<C-k>', ':TmuxNavigateUp<cr>', { desc = 'Tmux Navigate Up' }),
+}

neovim/kickstart-old/lua/kickstart/plugins/debug.lua

@@ -0,0 +1,87 @@
+-- debug.lua
+--
+-- Shows how to use the DAP plugin to debug your code.
+--
+-- Primarily focused on configuring the debugger for Go, but can
+-- be extended to other languages as well. That's why it's called
+-- kickstart.nvim and not kitchen-sink.nvim ;)
+
+return {
+  -- NOTE: Yes, you can install new plugins here!
+  'mfussenegger/nvim-dap',
+  -- NOTE: And you can specify dependencies as well
+  dependencies = {
+    -- Creates a beautiful debugger UI
+    'rcarriga/nvim-dap-ui',
+
+    -- Installs the debug adapters for you
+    'williamboman/mason.nvim',
+    'jay-babu/mason-nvim-dap.nvim',
+
+    -- Add your own debuggers here
+    'leoluz/nvim-dap-go',
+  },
+  config = function()
+    local dap = require 'dap'
+    local dapui = require 'dapui'
+
+    require('mason-nvim-dap').setup {
+      -- Makes a best effort to setup the various debuggers with
+      -- reasonable debug configurations
+      automatic_setup = true,
+
+      -- You can provide additional configuration to the handlers,
+      -- see mason-nvim-dap README for more information
+      handlers = {},
+
+      -- You'll need to check that you have the required things installed
+      -- online, please don't ask me how to install them :)
+      ensure_installed = {
+        -- Update this to ensure that you have the debuggers for the langs you want
+        'delve',
+      },
+    }
+
+    -- Basic debugging keymaps, feel free to change to your liking!
+    vim.keymap.set('n', '<F5>', dap.continue, { desc = 'Debug: Start/Continue' })
+    vim.keymap.set('n', '<F1>', dap.step_into, { desc = 'Debug: Step Into' })
+    vim.keymap.set('n', '<F2>', dap.step_over, { desc = 'Debug: Step Over' })
+    vim.keymap.set('n', '<F3>', dap.step_out, { desc = 'Debug: Step Out' })
+    vim.keymap.set('n', '<leader>b', dap.toggle_breakpoint, { desc = 'Debug: Toggle Breakpoint' })
+    vim.keymap.set('n', '<leader>B', function()
+      dap.set_breakpoint(vim.fn.input 'Breakpoint condition: ')
+    end, { desc = 'Debug: Set Breakpoint' })
+
+    -- Dap UI setup
+    -- For more information, see |:help nvim-dap-ui|
+    dapui.setup {
+      -- Set icons to characters that are more likely to work in every terminal.
+      --    Feel free to remove or use ones that you like more! :)
+      --    Don't feel like these are good choices.
+      icons = { expanded = '▾', collapsed = '▸', current_frame = '*' },
+      controls = {
+        icons = {
+          pause = '⏸',
+          play = '▶',
+          step_into = '⏎',
+          step_over = '⏭',
+          step_out = '⏮',
+          step_back = 'b',
+          run_last = '▶▶',
+          terminate = '⏹',
+          disconnect = '⏏',
+        },
+      },
+    }
+
+    -- Toggle to see last session result. Without this, you can't see session output in case of unhandled exception.
+    vim.keymap.set('n', '<F7>', dapui.toggle, { desc = 'Debug: See last session result.' })
+
+    dap.listeners.after.event_initialized['dapui_config'] = dapui.open
+    dap.listeners.before.event_terminated['dapui_config'] = dapui.close
+    dap.listeners.before.event_exited['dapui_config'] = dapui.close
+
+    -- Install golang specific config
+    require('dap-go').setup()
+  end,
+}

neovim/kickstart/.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,28 @@
+---
+name: Bug report
+about: Create a report to help us improve
+title: ''
+labels: ''
+assignees: ''
+
+---
+
+<!-- Any bug report not following this template will be immediately closed. Thanks -->
+
+## Describe the bug
+<!-- A clear and concise description of what the bug is. -->
+
+## To Reproduce
+<!-- Steps to reproduce the behavior. -->
+1. ...
+
+## Desktop
+<!-- please complete the following information. -->
+- OS: 
+- Terminal: 
+
+## Neovim Version
+<!-- Output of running `:version` from inside of neovim. -->
+
+```
+```

neovim/kickstart/.github/pull_request_template.md

@@ -0,0 +1,8 @@
+***************************************************************************
+**NOTE**
+Please verify that the `base repository` above has the intended destination!
+Github by default opens Pull Requests against the parent of a forked repository.
+If this is your personal fork and you didn't intend to open a PR for contribution
+to the original project then adjust the `base repository` accordingly.
+**************************************************************************
+

neovim/kickstart/.github/workflows/stylua.yml

@@ -0,0 +1,21 @@
+# Check Lua Formatting
+name: Check Lua Formatting
+on: pull_request_target
+
+jobs:
+  stylua-check:
+    if: github.repository == 'nvim-lua/kickstart.nvim'
+    name: Stylua Check
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout Code
+        uses: actions/checkout@v2
+        with:
+          ref: ${{ github.event.pull_request.head.sha }}
+      - name: Stylua Check
+        uses: JohnnyMorganz/stylua-action@v3
+        with:
+          token: ${{ secrets.GITHUB_TOKEN }}
+          version: latest
+          args: --check .
+

neovim/kickstart/.gitignore

@@ -0,0 +1,7 @@
+tags
+test.sh
+.luarc.json
+nvim
+
+spell/
+lazy-lock.json

neovim/kickstart/README.md

@@ -1,60 +1,96 @@
 # kickstart.nvim
 
-https://github.com/kdheepak/kickstart.nvim/assets/1813121/f3ff9a2b-c31f-44df-a4fa-8a0d7b17cf7b
+## Introduction
-
-### Introduction
 
 A starting point for Neovim that is:
 
 * Small
-* Single-file (with examples of moving to multi-file)
+* Single-file
-* Documented
+* Completely Documented
-* Modular
 
-This repo is meant to be used by **YOU** to begin your Neovim journey; remove the things you don't use and add what you miss.
+**NOT** a Neovim distribution, but instead a starting point for your configuration.
 
-Kickstart.nvim targets *only* the latest ['stable'](https://github.com/neovim/neovim/releases/tag/stable) and latest ['nightly'](https://github.com/neovim/neovim/releases/tag/nightly) of Neovim. If you are experiencing issues, please make sure you have the latest versions.
+## Installation
 
-Distribution Alternatives:
+### Install Neovim
-- [LazyVim](https://www.lazyvim.org/): A delightful distribution maintained by @folke (the author of lazy.nvim, the package manager used here)
 
-### Installation
+Kickstart.nvim targets *only* the latest
+['stable'](https://github.com/neovim/neovim/releases/tag/stable) and latest
+['nightly'](https://github.com/neovim/neovim/releases/tag/nightly) of Neovim.
+If you are experiencing issues, please make sure you have the latest versions.
 
-> **NOTE** 
+### Install External Dependencies
+
+External Requirements:
+- Basic utils: `git`, `make`, `unzip`, C Compiler (`gcc`)
+- [ripgrep](https://github.com/BurntSushi/ripgrep#installation)
+- Clipboard tool (xclip/xsel/win32yank or other depending on platform)
+- A [Nerd Font](https://www.nerdfonts.com/): optional, provides various icons
+  - if you have it set `vim.g.have_nerd_font` in `init.lua` to true
+- Language Setup:
+  - If you want to write Typescript, you need `npm`
+  - If you want to write Golang, you will need `go`
+  - etc.
+
+> **NOTE**
+> See [Install Recipes](#Install-Recipes) for additional Windows and Linux specific notes
+> and quick install snippets
+
+### Install Kickstart
+
+> **NOTE**
 > [Backup](#FAQ) your previous configuration (if any exists)
 
-Requirements:
-* Make sure to review the readmes of the plugins if you are experiencing errors. In particular:
-  * [ripgrep](https://github.com/BurntSushi/ripgrep#installation) is required for multiple [telescope](https://github.com/nvim-telescope/telescope.nvim#suggested-dependencies) pickers.
-* See [Windows Installation](#Windows-Installation) if you have trouble with `telescope-fzf-native`
-
 Neovim's configurations are located under the following paths, depending on your OS:
 
 | OS | PATH |
 | :- | :--- |
-| Linux | `$XDG_CONFIG_HOME/nvim`, `~/.config/nvim` |
+| Linux, MacOS | `$XDG_CONFIG_HOME/nvim`, `~/.config/nvim` |
-| MacOS | `$XDG_CONFIG_HOME/nvim`, `~/.config/nvim` |
+| Windows (cmd)| `%localappdata%\nvim\` |
-| Windows (cmd)| `%userprofile%\AppData\Local\nvim\` |
+| Windows (powershell)| `$env:LOCALAPPDATA\nvim\` |
-| Windows (powershell)| `$env:USERPROFILE\AppData\Local\nvim\` |
 
-Clone kickstart.nvim:
+#### Recommended Step
+
+[Fork](https://docs.github.com/en/get-started/quickstart/fork-a-repo) this repo
+so that you have your own copy that you can modify, then install by cloning the
+fork to your machine using one of the commands below, depending on your OS.
+
+> **NOTE**
+> Your fork's url will be something like this:
+> `https://github.com/<your_github_username>/kickstart.nvim.git`
+
+You likely want to remove `lazy-lock.json` from your fork's `.gitignore` file
+too - it's ignored in the kickstart repo to make maintenance easier, but it's
+[recommmended to track it in version control](https://lazy.folke.io/usage/lockfile).
+
+#### Clone kickstart.nvim
+> **NOTE**
+> If following the recommended step above (i.e., forking the repo), replace
+> `nvim-lua` with `<your_github_username>` in the commands below
+
+<details><summary> Linux and Mac </summary>
 
 ```sh
-# on Linux and Mac
 git clone https://github.com/nvim-lua/kickstart.nvim.git "${XDG_CONFIG_HOME:-$HOME/.config}"/nvim
 ```
 
+</details>
+
+<details><summary> Windows </summary>
+
+If you're using `cmd.exe`:
 
 ```
-# on Windows (cmd)
+git clone https://github.com/nvim-lua/kickstart.nvim.git "%localappdata%\nvim"
-git clone https://github.com/nvim-lua/kickstart.nvim.git %userprofile%\AppData\Local\nvim\ 
 ```
 
+If you're using `powershell.exe`
+
 ```
-# on Windows (powershell)
+git clone https://github.com/nvim-lua/kickstart.nvim.git "${env:LOCALAPPDATA}\nvim"
-git clone https://github.com/nvim-lua/kickstart.nvim.git $env:USERPROFILE\AppData\Local\nvim\ 
 ```
 
+</details>
 
 ### Post Installation
 
@@ -64,132 +100,134 @@ Start Neovim
 nvim
 ```
 
-The `Lazy` plugin manager will start automatically on the first run and install the configured plugins - as can be seen in the introduction video. After the installation is complete you can press `q` to close the `Lazy` UI and **you are ready to go**! Next time you run nvim `Lazy` will no longer show up.
+That's it! Lazy will install all the plugins you have. Use `:Lazy` to view
+current plugin status. Hit `q` to close the window.
 
-If you would prefer to hide this step and run the plugin sync from the command line, you can use:
+Read through the `init.lua` file in your configuration folder for more
-
+information about extending and exploring Neovim. That also includes
-```sh
+examples of adding popularly requested plugins.
-nvim --headless "+Lazy! sync" +qa
-```
-
-### Recommended Steps
-
-[Fork](https://docs.github.com/en/get-started/quickstart/fork-a-repo) this repo (so that you have your own copy that you can modify) and then installing you can install to your machine using the methods above.
-
-> **NOTE**  
-> Your fork's url will be something like this: `https://github.com/<your_github_username>/kickstart.nvim.git`
-
-### Configuration And Extension
-
-* Inside of your copy, feel free to modify any file you like! It's your copy!
-* Feel free to change any of the default options in `init.lua` to better suit your needs.
-* For adding plugins, there are 3 primary options:
-  * Add new configuration in `lua/custom/plugins/*` files, which will be auto sourced using `lazy.nvim` (uncomment the line importing the `custom/plugins` directory in the `init.lua` file to enable this)
-  * Modify `init.lua` with additional plugins.
-  * Include the `lua/kickstart/plugins/*` files in your configuration.
-
-You can also merge updates/changes from the repo back into your fork, to keep up-to-date with any changes for the default configuration.
-
-#### Example: Adding an autopairs plugin
-
-In the file: `lua/custom/plugins/autopairs.lua`, add:
-
-```lua
--- File: lua/custom/plugins/autopairs.lua
-
-return {
-  "windwp/nvim-autopairs",
-  -- Optional dependency
-  dependencies = { 'hrsh7th/nvim-cmp' },
-  config = function()
-    require("nvim-autopairs").setup {}
-    -- If you want to automatically add `(` after selecting a function or method
-    local cmp_autopairs = require('nvim-autopairs.completion.cmp')
-    local cmp = require('cmp')
-    cmp.event:on(
-      'confirm_done',
-      cmp_autopairs.on_confirm_done()
-    )
-  end,
-}
-```
 
 
-This will automatically install [windwp/nvim-autopairs](https://github.com/windwp/nvim-autopairs) and enable it on startup. For more information, see documentation for [lazy.nvim](https://github.com/folke/lazy.nvim).
+### Getting Started
 
-#### Example: Adding a file tree plugin
+[The Only Video You Need to Get Started with Neovim](https://youtu.be/m8C0Cq9Uv9o)
-
-In the file: `lua/custom/plugins/filetree.lua`, add:
-
-```lua
--- Unless you are still migrating, remove the deprecated commands from v1.x
-vim.cmd([[ let g:neo_tree_remove_legacy_commands = 1 ]])
-
-return {
-  "nvim-neo-tree/neo-tree.nvim",
-  version = "*",
-  dependencies = {
-    "nvim-lua/plenary.nvim",
-    "nvim-tree/nvim-web-devicons", -- not strictly required, but recommended
-    "MunifTanjim/nui.nvim",
-  },
-  config = function ()
-    require('neo-tree').setup {}
-  end,
-}
-```
-
-This will install the tree plugin and add the command `:Neotree` for you. You can explore the documentation at [neo-tree.nvim](https://github.com/nvim-neo-tree/neo-tree.nvim) for more information.
-
-### Contribution
-
-Pull-requests are welcome. The goal of this repo is not to create a Neovim configuration framework, but to offer a starting template that shows, by example, available features in Neovim. Some things that will not be included:
-
-* Custom language server configuration (null-ls templates)
-* Theming beyond a default colorscheme necessary for LSP highlight groups
-
-Each PR, especially those which increase the line count, should have a description as to why the PR is necessary.
 
 ### FAQ
 
 * What should I do if I already have a pre-existing neovim configuration?
-  * You should back it up, then delete all files associated with it.
+  * You should back it up and then delete all associated files.
-  * This includes your existing init.lua and the neovim files in `~/.local` which can be deleted with `rm -rf ~/.local/share/nvim/`
+  * This includes your existing init.lua and the neovim files in `~/.local`
-  * You may also want to look at the [migration guide for lazy.nvim](https://github.com/folke/lazy.nvim#-migration-guide)
+    which can be deleted with `rm -rf ~/.local/share/nvim/`
 * Can I keep my existing configuration in parallel to kickstart?
-  * Yes! You can use [NVIM_APPNAME](https://neovim.io/doc/user/starting.html#%24NVIM_APPNAME)`=nvim-NAME` to maintain multiple configurations. For example you can install the kickstart configuration in `~/.config/nvim-kickstart` and create a script `~/bin/nvim-kickstart`:
+  * Yes! You can use [NVIM_APPNAME](https://neovim.io/doc/user/starting.html#%24NVIM_APPNAME)`=nvim-NAME`
+    to maintain multiple configurations. For example, you can install the kickstart
+    configuration in `~/.config/nvim-kickstart` and create an alias:
     ```
-    #!/bin/sh
+    alias nvim-kickstart='NVIM_APPNAME="nvim-kickstart" nvim'
-    exec env NVIM_APPNAME=nvim-kickstart nvim "$@"
     ```
-    When you run Neovim with `nvim-kickstart` it will use the alternative config directory and the matching local directory: `~/.local/share/nvim-kickstart`. You can apply this approach to any Neovim distribution that you would like to try out.
+    When you run Neovim using `nvim-kickstart` alias it will use the alternative
+    config directory and the matching local directory
+    `~/.local/share/nvim-kickstart`. You can apply this approach to any Neovim
+    distribution that you would like to try out.
 * What if I want to "uninstall" this configuration:
-  * See [lazy.nvim uninstall](https://github.com/folke/lazy.nvim#-uninstalling) information
+  * See [lazy.nvim uninstall](https://lazy.folke.io/usage#-uninstalling) information
-* Are there any cool videos about this plugin?
-  * Current iteration of kickstart (coming soon)
-  * Here is one about the previous iteration of kickstart: [video introduction to Kickstart.nvim](https://youtu.be/stqUbv-5u2s). Note the install via init.lua no longer works as specified. Please follow the install instructions in this file instead as they're up to date.
 * Why is the kickstart `init.lua` a single file? Wouldn't it make sense to split it into multiple files?
   * The main purpose of kickstart is to serve as a teaching tool and a reference
-    configuration that someone can easily `git clone` as a basis for their own.
+    configuration that someone can easily use to `git clone` as a basis for their own.
     As you progress in learning Neovim and Lua, you might consider splitting `init.lua`
-    into smaller parts. A fork of kickstart that does this while maintaining the exact
+    into smaller parts. A fork of kickstart that does this while maintaining the 
     same functionality is available here:
     * [kickstart-modular.nvim](https://github.com/dam9000/kickstart-modular.nvim)
   * Discussions on this topic can be found here:
     * [Restructure the configuration](https://github.com/nvim-lua/kickstart.nvim/issues/218)
     * [Reorganize init.lua into a multi-file setup](https://github.com/nvim-lua/kickstart.nvim/pull/473)
 
-### Windows Installation
+### Install Recipes
 
-Installation may require installing build tools, and updating the run command for `telescope-fzf-native`
+Below you can find OS specific install instructions for Neovim and dependencies.
+
+After installing all the dependencies continue with the [Install Kickstart](#Install-Kickstart) step.
+
+#### Windows Installation
+
+<details><summary>Windows with Microsoft C++ Build Tools and CMake</summary>
+Installation may require installing build tools and updating the run command for `telescope-fzf-native`
 
 See `telescope-fzf-native` documentation for [more details](https://github.com/nvim-telescope/telescope-fzf-native.nvim#installation)
 
 This requires:
 
-- Install CMake, and the Microsoft C++ Build Tools on Windows
+- Install CMake and the Microsoft C++ Build Tools on Windows
 
 ```lua
 {'nvim-telescope/telescope-fzf-native.nvim', build = 'cmake -S. -Bbuild -DCMAKE_BUILD_TYPE=Release && cmake --build build --config Release && cmake --install build --prefix build' }
 ```
+</details>
+<details><summary>Windows with gcc/make using chocolatey</summary>
+Alternatively, one can install gcc and make which don't require changing the config,
+the easiest way is to use choco:
+
+1. install [chocolatey](https://chocolatey.org/install)
+either follow the instructions on the page or use winget,
+run in cmd as **admin**:
+```
+winget install --accept-source-agreements chocolatey.chocolatey
+```
+
+2. install all requirements using choco, exit previous cmd and
+open a new one so that choco path is set, and run in cmd as **admin**:
+```
+choco install -y neovim git ripgrep wget fd unzip gzip mingw make
+```
+</details>
+<details><summary>WSL (Windows Subsystem for Linux)</summary>
+
+```
+wsl --install
+wsl
+sudo add-apt-repository ppa:neovim-ppa/unstable -y
+sudo apt update
+sudo apt install make gcc ripgrep unzip git xclip neovim
+```
+</details>
+
+#### Linux Install
+<details><summary>Ubuntu Install Steps</summary>
+
+```
+sudo add-apt-repository ppa:neovim-ppa/unstable -y
+sudo apt update
+sudo apt install make gcc ripgrep unzip git xclip neovim
+```
+</details>
+<details><summary>Debian Install Steps</summary>
+
+```
+sudo apt update
+sudo apt install make gcc ripgrep unzip git xclip curl
+
+# Now we install nvim
+curl -LO https://github.com/neovim/neovim/releases/latest/download/nvim-linux64.tar.gz
+sudo rm -rf /opt/nvim-linux64
+sudo mkdir -p /opt/nvim-linux64
+sudo chmod a+rX /opt/nvim-linux64
+sudo tar -C /opt -xzf nvim-linux64.tar.gz
+
+# make it available in /usr/local/bin, distro installs to /usr/bin
+sudo ln -sf /opt/nvim-linux64/bin/nvim /usr/local/bin/
+```
+</details>
+<details><summary>Fedora Install Steps</summary>
+
+```
+sudo dnf install -y gcc make git ripgrep fd-find unzip neovim
+```
+</details>
+
+<details><summary>Arch Install Steps</summary>
+
+```
+sudo pacman -S --noconfirm --needed gcc make git ripgrep fd unzip neovim
+```
+</details>
 

neovim/kickstart/lua/kickstart/health.lua

@@ -0,0 +1,52 @@
+--[[
+--
+-- This file is not required for your own configuration,
+-- but helps people determine if their system is setup correctly.
+--
+--]]
+
+local check_version = function()
+  local verstr = tostring(vim.version())
+  if not vim.version.ge then
+    vim.health.error(string.format("Neovim out of date: '%s'. Upgrade to latest stable or nightly", verstr))
+    return
+  end
+
+  if vim.version.ge(vim.version(), '0.10-dev') then
+    vim.health.ok(string.format("Neovim version is: '%s'", verstr))
+  else
+    vim.health.error(string.format("Neovim out of date: '%s'. Upgrade to latest stable or nightly", verstr))
+  end
+end
+
+local check_external_reqs = function()
+  -- Basic utils: `git`, `make`, `unzip`
+  for _, exe in ipairs { 'git', 'make', 'unzip', 'rg' } do
+    local is_executable = vim.fn.executable(exe) == 1
+    if is_executable then
+      vim.health.ok(string.format("Found executable: '%s'", exe))
+    else
+      vim.health.warn(string.format("Could not find executable: '%s'", exe))
+    end
+  end
+
+  return true
+end
+
+return {
+  check = function()
+    vim.health.start 'kickstart.nvim'
+
+    vim.health.info [[NOTE: Not every warning is a 'must-fix' in `:checkhealth`
+
+  Fix only warnings for plugins and languages you intend to use.
+    Mason will give warnings for languages that are not installed.
+    You do not need to install, unless you want to use those languages!]]
+
+    local uv = vim.uv or vim.loop
+    vim.health.info('System Information: ' .. vim.inspect(uv.os_uname()))
+
+    check_version()
+    check_external_reqs()
+  end,
+}

neovim/kickstart/lua/kickstart/plugins/autopairs.lua

@@ -0,0 +1,16 @@
+-- autopairs
+-- https://github.com/windwp/nvim-autopairs
+
+return {
+  'windwp/nvim-autopairs',
+  event = 'InsertEnter',
+  -- Optional dependency
+  dependencies = { 'hrsh7th/nvim-cmp' },
+  config = function()
+    require('nvim-autopairs').setup {}
+    -- If you want to automatically add `(` after selecting a function or method
+    local cmp_autopairs = require 'nvim-autopairs.completion.cmp'
+    local cmp = require 'cmp'
+    cmp.event:on('confirm_done', cmp_autopairs.on_confirm_done())
+  end,
+}

neovim/kickstart/lua/kickstart/plugins/debug.lua

@@ -14,6 +14,9 @@ return {
     -- Creates a beautiful debugger UI
     'rcarriga/nvim-dap-ui',
 
+    -- Required dependency for nvim-dap-ui
+    'nvim-neotest/nvim-nio',
+
     -- Installs the debug adapters for you
     'williamboman/mason.nvim',
     'jay-babu/mason-nvim-dap.nvim',
@@ -21,6 +24,28 @@ return {
     -- Add your own debuggers here
     'leoluz/nvim-dap-go',
   },
+  keys = function(_, keys)
+    local dap = require 'dap'
+    local dapui = require 'dapui'
+    return {
+      -- Basic debugging keymaps, feel free to change to your liking!
+      { '<F5>', dap.continue, desc = 'Debug: Start/Continue' },
+      { '<F1>', dap.step_into, desc = 'Debug: Step Into' },
+      { '<F2>', dap.step_over, desc = 'Debug: Step Over' },
+      { '<F3>', dap.step_out, desc = 'Debug: Step Out' },
+      { '<leader>b', dap.toggle_breakpoint, desc = 'Debug: Toggle Breakpoint' },
+      {
+        '<leader>B',
+        function()
+          dap.set_breakpoint(vim.fn.input 'Breakpoint condition: ')
+        end,
+        desc = 'Debug: Set Breakpoint',
+      },
+      -- Toggle to see last session result. Without this, you can't see session output in case of unhandled exception.
+      { '<F7>', dapui.toggle, desc = 'Debug: See last session result.' },
+      unpack(keys),
+    }
+  end,
   config = function()
     local dap = require 'dap'
     local dapui = require 'dapui'
@@ -28,7 +53,7 @@ return {
     require('mason-nvim-dap').setup {
       -- Makes a best effort to setup the various debuggers with
       -- reasonable debug configurations
-      automatic_setup = true,
+      automatic_installation = true,
 
       -- You can provide additional configuration to the handlers,
       -- see mason-nvim-dap README for more information
@@ -42,16 +67,6 @@ return {
       },
     }
 
-    -- Basic debugging keymaps, feel free to change to your liking!
-    vim.keymap.set('n', '<F5>', dap.continue, { desc = 'Debug: Start/Continue' })
-    vim.keymap.set('n', '<F1>', dap.step_into, { desc = 'Debug: Step Into' })
-    vim.keymap.set('n', '<F2>', dap.step_over, { desc = 'Debug: Step Over' })
-    vim.keymap.set('n', '<F3>', dap.step_out, { desc = 'Debug: Step Out' })
-    vim.keymap.set('n', '<leader>b', dap.toggle_breakpoint, { desc = 'Debug: Toggle Breakpoint' })
-    vim.keymap.set('n', '<leader>B', function()
-      dap.set_breakpoint(vim.fn.input 'Breakpoint condition: ')
-    end, { desc = 'Debug: Set Breakpoint' })
-
     -- Dap UI setup
     -- For more information, see |:help nvim-dap-ui|
     dapui.setup {
@@ -74,14 +89,29 @@ return {
       },
     }
 
-    -- Toggle to see last session result. Without this, you can't see session output in case of unhandled exception.
+    -- Change breakpoint icons
-    vim.keymap.set('n', '<F7>', dapui.toggle, { desc = 'Debug: See last session result.' })
+    -- vim.api.nvim_set_hl(0, 'DapBreak', { fg = '#e51400' })
+    -- vim.api.nvim_set_hl(0, 'DapStop', { fg = '#ffcc00' })
+    -- local breakpoint_icons = vim.g.have_nerd_font
+    --     and { Breakpoint = '', BreakpointCondition = '', BreakpointRejected = '', LogPoint = '', Stopped = '' }
+    --   or { Breakpoint = '●', BreakpointCondition = '⊜', BreakpointRejected = '⊘', LogPoint = '◆', Stopped = '⭔' }
+    -- for type, icon in pairs(breakpoint_icons) do
+    --   local tp = 'Dap' .. type
+    --   local hl = (type == 'Stopped') and 'DapStop' or 'DapBreak'
+    --   vim.fn.sign_define(tp, { text = icon, texthl = hl, numhl = hl })
+    -- end
 
     dap.listeners.after.event_initialized['dapui_config'] = dapui.open
     dap.listeners.before.event_terminated['dapui_config'] = dapui.close
     dap.listeners.before.event_exited['dapui_config'] = dapui.close
 
     -- Install golang specific config
-    require('dap-go').setup()
+    require('dap-go').setup {
+      delve = {
+        -- On Windows delve must be run attached or it crashes.
+        -- See https://github.com/leoluz/nvim-dap-go/blob/main/README.md#configuring
+        detached = vim.fn.has 'win32' == 0,
+      },
+    }
   end,
 }

neovim/kickstart/lua/kickstart/plugins/gitsigns.lua

@@ -0,0 +1,61 @@
+-- Adds git related signs to the gutter, as well as utilities for managing changes
+-- NOTE: gitsigns is already included in init.lua but contains only the base
+-- config. This will add also the recommended keymaps.
+
+return {
+  {
+    'lewis6991/gitsigns.nvim',
+    opts = {
+      on_attach = function(bufnr)
+        local gitsigns = require 'gitsigns'
+
+        local function map(mode, l, r, opts)
+          opts = opts or {}
+          opts.buffer = bufnr
+          vim.keymap.set(mode, l, r, opts)
+        end
+
+        -- Navigation
+        map('n', ']c', function()
+          if vim.wo.diff then
+            vim.cmd.normal { ']c', bang = true }
+          else
+            gitsigns.nav_hunk 'next'
+          end
+        end, { desc = 'Jump to next git [c]hange' })
+
+        map('n', '[c', function()
+          if vim.wo.diff then
+            vim.cmd.normal { '[c', bang = true }
+          else
+            gitsigns.nav_hunk 'prev'
+          end
+        end, { desc = 'Jump to previous git [c]hange' })
+
+        -- Actions
+        -- visual mode
+        map('v', '<leader>hs', function()
+          gitsigns.stage_hunk { vim.fn.line '.', vim.fn.line 'v' }
+        end, { desc = 'stage git hunk' })
+        map('v', '<leader>hr', function()
+          gitsigns.reset_hunk { vim.fn.line '.', vim.fn.line 'v' }
+        end, { desc = 'reset git hunk' })
+        -- normal mode
+        map('n', '<leader>hs', gitsigns.stage_hunk, { desc = 'git [s]tage hunk' })
+        map('n', '<leader>hr', gitsigns.reset_hunk, { desc = 'git [r]eset hunk' })
+        map('n', '<leader>hS', gitsigns.stage_buffer, { desc = 'git [S]tage buffer' })
+        map('n', '<leader>hu', gitsigns.undo_stage_hunk, { desc = 'git [u]ndo stage hunk' })
+        map('n', '<leader>hR', gitsigns.reset_buffer, { desc = 'git [R]eset buffer' })
+        map('n', '<leader>hp', gitsigns.preview_hunk, { desc = 'git [p]review hunk' })
+        map('n', '<leader>hb', gitsigns.blame_line, { desc = 'git [b]lame line' })
+        map('n', '<leader>hd', gitsigns.diffthis, { desc = 'git [d]iff against index' })
+        map('n', '<leader>hD', function()
+          gitsigns.diffthis '@'
+        end, { desc = 'git [D]iff against last commit' })
+        -- Toggles
+        map('n', '<leader>tb', gitsigns.toggle_current_line_blame, { desc = '[T]oggle git show [b]lame line' })
+        map('n', '<leader>tD', gitsigns.toggle_deleted, { desc = '[T]oggle git show [D]eleted' })
+      end,
+    },
+  },
+}

neovim/kickstart/lua/kickstart/plugins/indent_line.lua

@@ -0,0 +1,9 @@
+return {
+  { -- Add indentation guides even on blank lines
+    'lukas-reineke/indent-blankline.nvim',
+    -- Enable `lukas-reineke/indent-blankline.nvim`
+    -- See `:help ibl`
+    main = 'ibl',
+    opts = {},
+  },
+}

neovim/kickstart/lua/kickstart/plugins/lint.lua

@@ -0,0 +1,60 @@
+return {
+
+  { -- Linting
+    'mfussenegger/nvim-lint',
+    event = { 'BufReadPre', 'BufNewFile' },
+    config = function()
+      local lint = require 'lint'
+      lint.linters_by_ft = {
+        markdown = { 'markdownlint' },
+      }
+
+      -- To allow other plugins to add linters to require('lint').linters_by_ft,
+      -- instead set linters_by_ft like this:
+      -- lint.linters_by_ft = lint.linters_by_ft or {}
+      -- lint.linters_by_ft['markdown'] = { 'markdownlint' }
+      --
+      -- However, note that this will enable a set of default linters,
+      -- which will cause errors unless these tools are available:
+      -- {
+      --   clojure = { "clj-kondo" },
+      --   dockerfile = { "hadolint" },
+      --   inko = { "inko" },
+      --   janet = { "janet" },
+      --   json = { "jsonlint" },
+      --   markdown = { "vale" },
+      --   rst = { "vale" },
+      --   ruby = { "ruby" },
+      --   terraform = { "tflint" },
+      --   text = { "vale" }
+      -- }
+      --
+      -- You can disable the default linters by setting their filetypes to nil:
+      -- lint.linters_by_ft['clojure'] = nil
+      -- lint.linters_by_ft['dockerfile'] = nil
+      -- lint.linters_by_ft['inko'] = nil
+      -- lint.linters_by_ft['janet'] = nil
+      -- lint.linters_by_ft['json'] = nil
+      -- lint.linters_by_ft['markdown'] = nil
+      -- lint.linters_by_ft['rst'] = nil
+      -- lint.linters_by_ft['ruby'] = nil
+      -- lint.linters_by_ft['terraform'] = nil
+      -- lint.linters_by_ft['text'] = nil
+
+      -- Create autocommand which carries out the actual linting
+      -- on the specified events.
+      local lint_augroup = vim.api.nvim_create_augroup('lint', { clear = true })
+      vim.api.nvim_create_autocmd({ 'BufEnter', 'BufWritePost', 'InsertLeave' }, {
+        group = lint_augroup,
+        callback = function()
+          -- Only run the linter in buffers that you can modify in order to
+          -- avoid superfluous noise, notably within the handy LSP pop-ups that
+          -- describe the hovered symbol using Markdown.
+          if vim.opt_local.modifiable:get() then
+            lint.try_lint()
+          end
+        end,
+      })
+    end,
+  },
+}

neovim/kickstart/lua/kickstart/plugins/neo-tree.lua

@@ -0,0 +1,25 @@
+-- Neo-tree is a Neovim plugin to browse the file system
+-- https://github.com/nvim-neo-tree/neo-tree.nvim
+
+return {
+  'nvim-neo-tree/neo-tree.nvim',
+  version = '*',
+  dependencies = {
+    'nvim-lua/plenary.nvim',
+    'nvim-tree/nvim-web-devicons', -- not strictly required, but recommended
+    'MunifTanjim/nui.nvim',
+  },
+  cmd = 'Neotree',
+  keys = {
+    { '\\', ':Neotree reveal<CR>', desc = 'NeoTree reveal', silent = true },
+  },
+  opts = {
+    filesystem = {
+      window = {
+        mappings = {
+          ['\\'] = 'close_window',
+        },
+      },
+    },
+  },
+}

niri/config.kdl

@@ -0,0 +1,654 @@
+// This config is in the KDL format: https://kdl.dev
+// "/-" comments out the following node.
+// Check the wiki for a full description of the configuration:
+// https://github.com/YaLTeR/niri/wiki/Configuration:-Introduction
+
+hotkey-overlay {
+    skip-at-startup
+}
+
+// Input device configuration.
+// Find the full list of options on the wiki:
+// https://github.com/YaLTeR/niri/wiki/Configuration:-Input
+input {
+    keyboard {
+        xkb {
+            // You can set rules, model, layout, variant and options.
+            // For more information, see xkeyboard-config(7).
+
+            // For example:
+            // layout "us,ru"
+            // options "grp:win_space_toggle,compose:ralt,ctrl:nocaps"
+        }
+
+        // Enable numlock on startup, omitting this setting disables it.
+        numlock
+    }
+
+    // Next sections include libinput settings.
+    // Omitting settings disables them, or leaves them at their default values.
+    touchpad {
+        off
+        // tap
+        // dwt
+        // dwtp
+        // drag false
+        // drag-lock
+        // natural-scroll
+        // accel-speed 0.2
+        // accel-profile "flat"
+        // scroll-method "two-finger"
+        // disabled-on-external-mouse
+    }
+
+    mouse {
+        // off
+        // natural-scroll
+        // accel-speed 0.2
+        // accel-profile "flat"
+        // scroll-method "no-scroll"
+    }
+
+    trackpoint {
+        // off
+
+        // natural-scroll
+        // accel-speed 0.2
+        // accel-profile "flat"
+        // scroll-method "on-button-down"
+        // scroll-button 273
+        // middle-emulation
+    }
+
+    // Uncomment this to make the mouse warp to the center of newly focused windows.
+    warp-mouse-to-focus
+
+    // Focus windows and outputs automatically when moving the mouse into them.
+    // Setting max-scroll-amount="0%" makes it work only on windows already fully on screen.
+    focus-follows-mouse max-scroll-amount="0%"
+
+    // Change the Mod key to Alt
+    mod-key "Alt"
+}
+
+// You can configure outputs by their name, which you can find
+// by running `niri msg outputs` while inside a niri instance.
+// The built-in laptop monitor is usually called "eDP-1".
+// Find more information on the wiki:
+// https://github.com/YaLTeR/niri/wiki/Configuration:-Outputs
+// Remember to uncomment the node by removing "/-"!
+/-output "eDP-1" {
+    // Uncomment this line to disable this output.
+    // off
+
+    // Resolution and, optionally, refresh rate of the output.
+    // The format is "<width>x<height>" or "<width>x<height>@<refresh rate>".
+    // If the refresh rate is omitted, niri will pick the highest refresh rate
+    // for the resolution.
+    // If the mode is omitted altogether or is invalid, niri will pick one automatically.
+    // Run `niri msg outputs` while inside a niri instance to list all outputs and their modes.
+    mode "1920x1080@120.030"
+
+    // You can use integer or fractional scale, for example use 1.5 for 150% scale.
+    scale 2
+
+    // Transform allows to rotate the output counter-clockwise, valid values are:
+    // normal, 90, 180, 270, flipped, flipped-90, flipped-180 and flipped-270.
+    transform "normal"
+
+    // Position of the output in the global coordinate space.
+    // This affects directional monitor actions like "focus-monitor-left", and cursor movement.
+    // The cursor can only move between directly adjacent outputs.
+    // Output scale and rotation has to be taken into account for positioning:
+    // outputs are sized in logical, or scaled, pixels.
+    // For example, a 3840×2160 output with scale 2.0 will have a logical size of 1920×1080,
+    // so to put another output directly adjacent to it on the right, set its x to 1920.
+    // If the position is unset or results in an overlap, the output is instead placed
+    // automatically.
+    position x=1280 y=0
+}
+output "Acer Technologies KG272U TP1SA002851C" {
+    mode "2560x1440"
+    scale 1
+    transform "90"
+    position x=0 y=0
+}
+
+output "ViewSonic Corporation VX2758-Series VVF190100000" {
+    mode "2560x1440"
+    scale 1
+    transform "normal"
+    position x=1440 y=755
+    focus-at-startup
+}
+
+// Settings that influence how windows are positioned and sized.
+// Find more information on the wiki:
+// https://github.com/YaLTeR/niri/wiki/Configuration:-Layout
+layout {
+    // Set gaps around windows in logical pixels.
+    gaps 8
+
+    // When to center a column when changing focus, options are:
+    // - "never", default behavior, focusing an off-screen column will keep at the left
+    //   or right edge of the screen.
+    // - "always", the focused column will always be centered.
+    // - "on-overflow", focusing a column will center it if it doesn't fit
+    //   together with the previously focused column.
+    center-focused-column "never"
+
+    // You can customize the widths that "switch-preset-column-width" (Mod+R) toggles between.
+    preset-column-widths {
+        // Proportion sets the width as a fraction of the output width, taking gaps into account.
+        // For example, you can perfectly fit four windows sized "proportion 0.25" on an output.
+        // The default preset widths are 1/3, 1/2 and 2/3 of the output.
+        proportion 0.33333
+        proportion 0.5
+        proportion 0.66667
+        proportion 1.0
+
+        // Fixed sets the width in logical pixels exactly.
+        // fixed 1920
+    }
+
+    // You can also customize the heights that "switch-preset-window-height" (Mod+Shift+R) toggles between.
+    // preset-window-heights { }
+
+    // You can change the default width of the new windows.
+    default-column-width { proportion 0.5; }
+    // If you leave the brackets empty, the windows themselves will decide their initial width.
+    // default-column-width {}
+
+    // By default focus ring and border are rendered as a solid background rectangle
+    // behind windows. That is, they will show up through semitransparent windows.
+    // This is because windows using client-side decorations can have an arbitrary shape.
+    //
+    // If you don't like that, you should uncomment `prefer-no-csd` below.
+    // Niri will draw focus ring and border *around* windows that agree to omit their
+    // client-side decorations.
+    //
+    // Alternatively, you can override it with a window rule called
+    // `draw-border-with-background`.
+
+    // You can change how the focus ring looks.
+    focus-ring {
+        // Uncomment this line to disable the focus ring.
+        // off
+
+        // How many logical pixels the ring extends out from the windows.
+        width 4
+
+        // Colors can be set in a variety of ways:
+        // - CSS named colors: "red"
+        // - RGB hex: "#rgb", "#rgba", "#rrggbb", "#rrggbbaa"
+        // - CSS-like notation: "rgb(255, 127, 0)", rgba(), hsl() and a few others.
+
+        // Color of the ring on the active monitor.
+        // active-color "#7fc8ff"
+
+        // Color of the ring on inactive monitors.
+        inactive-color "#505050"
+
+        // You can also use gradients. They take precedence over solid colors.
+        // Gradients are rendered the same as CSS linear-gradient(angle, from, to).
+        // The angle is the same as in linear-gradient, and is optional,
+        // defaulting to 180 (top-to-bottom gradient).
+        // You can use any CSS linear-gradient tool on the web to set these up.
+        // Changing the color space is also supported, check the wiki for more info.
+        //
+        active-gradient from="#00ffe5" to="#2887c7" angle=45
+
+        // You can also color the gradient relative to the entire view
+        // of the workspace, rather than relative to just the window itself.
+        // To do that, set relative-to="workspace-view".
+        //
+        // inactive-gradient from="#505050" to="#808080" angle=45 relative-to="workspace-view"
+    }
+
+    // You can also add a border. It's similar to the focus ring, but always visible.
+    border {
+        // The settings are the same as for the focus ring.
+        // If you enable the border, you probably want to disable the focus ring.
+        off
+
+        width 4
+        active-color "#ffc87f"
+        inactive-color "#505050"
+
+        // Color of the border around windows that request your attention.
+        urgent-color "#9b0000"
+
+        // active-gradient from="#ffbb66" to="#ffc880" angle=45 relative-to="workspace-view"
+        // inactive-gradient from="#505050" to="#808080" angle=45 relative-to="workspace-view"
+    }
+
+    // You can enable drop shadows for windows.
+    shadow {
+        // Uncomment the next line to enable shadows.
+        on
+
+        // By default, the shadow draws only around its window, and not behind it.
+        // Uncomment this setting to make the shadow draw behind its window.
+        //
+        // Note that niri has no way of knowing about the CSD window corner
+        // radius. It has to assume that windows have square corners, leading to
+        // shadow artifacts inside the CSD rounded corners. This setting fixes
+        // those artifacts.
+        //
+        // However, instead you may want to set prefer-no-csd and/or
+        // geometry-corner-radius. Then, niri will know the corner radius and
+        // draw the shadow correctly, without having to draw it behind the
+        // window. These will also remove client-side shadows if the window
+        // draws any.
+        //
+        // draw-behind-window true
+
+        // You can change how shadows look. The values below are in logical
+        // pixels and match the CSS box-shadow properties.
+
+        // Softness controls the shadow blur radius.
+        softness 30
+
+        // Spread expands the shadow.
+        spread 5
+
+        // Offset moves the shadow relative to the window.
+        offset x=0 y=5
+
+        // You can also change the shadow color and opacity.
+        color "#0007"
+    }
+
+    // Struts shrink the area occupied by windows, similarly to layer-shell panels.
+    // You can think of them as a kind of outer gaps. They are set in logical pixels.
+    // Left and right struts will cause the next window to the side to always be visible.
+    // Top and bottom struts will simply add outer gaps in addition to the area occupied by
+    // layer-shell panels and regular gaps.
+    struts {
+        // left 64
+        // right 64
+        // top 64
+        // bottom 64
+    }
+}
+
+// Add lines like this to spawn processes at startup.
+// Note that running niri as a session supports xdg-desktop-autostart,
+// which may be more convenient to use.
+// See the binds section below for more spawn examples.
+
+// This line starts waybar, a commonly used bar for Wayland compositors.
+// spawn-at-startup "waybar"
+spawn-at-startup "/home/reivernet/.config/niri/sway_startup" "/home/reivernet/Pictures/Nextcloud/IMG_8618-Enhanced-NR.jpg"
+spawn-at-startup "xwayland-satellite"
+spawn-at-startup "cosmic-app-library"
+
+environment {
+    DISPLAY ":0"
+}
+// Uncomment this line to ask the clients to omit their client-side decorations if possible.
+// If the client will specifically ask for CSD, the request will be honored.
+// Additionally, clients will be informed that they are tiled, removing some client-side rounded corners.
+// This option will also fix border/focus ring drawing behind some semitransparent windows.
+// After enabling or disabling this, you need to restart the apps for this to take effect.
+prefer-no-csd
+
+// You can change the path where screenshots are saved.
+// A ~ at the front will be expanded to the home directory.
+// The path is formatted with strftime(3) to give you the screenshot date and time.
+screenshot-path "~/Pictures/Screenshots/Screenshot from %Y-%m-%d %H-%M-%S.png"
+
+// You can also set this to null to disable saving screenshots to disk.
+// screenshot-path null
+
+// Animation settings.
+// The wiki explains how to configure individual animations:
+// https://github.com/YaLTeR/niri/wiki/Configuration:-Animations
+animations {
+    // Uncomment to turn off all animations.
+    // off
+
+    // Slow down all animations by this factor. Values below 1 speed them up instead.
+    // slowdown 3.0
+}
+
+// Window rules let you adjust behavior for individual windows.
+// Find more information on the wiki:
+// https://github.com/YaLTeR/niri/wiki/Configuration:-Window-Rules
+
+// Work around WezTerm's initial configure bug
+// by setting an empty default-column-width.
+// window-rule {
+    // This regular expression is intentionally made as specific as possible,
+    // since this is the default config, and we want no false positives.
+    // You can get away with just app-id="wezterm" if you want.
+    // match app-id=r#"^org\.wezfurlong\.wezterm$"#
+    // default-column-width {}
+// }
+
+// Open the Firefox picture-in-picture player as floating by default.
+window-rule {
+    // This app-id regular expression will work for both:
+    // - host Firefox (app-id is "firefox")
+    // - Flatpak Firefox (app-id is "org.mozilla.firefox")
+    match app-id=r#"firefox$"# title="^Picture-in-Picture$"
+    match app-id=r#"zen$"# title="^Picture-in-Picture$"
+    match app-id=r#"zen$"# title="^Extension:"
+    match app-id=r#"com.nextcloud.desktopclient.nextcloud$"#
+    match app-id=r#"mako"#
+    match app-id="org.gnome.Nautilus" title="Open Folder"
+    match app-id="Intune-portal"
+
+    open-floating true
+}
+
+window-rule {
+    // Zed and Zen should be 66% wide
+    match app-id="dev.zed.Zed"
+    match app-id="zen"
+
+    default-column-width { proportion 0.66667; }
+}
+
+window-rule {
+    // Solve space property manager
+    match app-id="solvespace"
+
+    default-column-width { proportion 0.75; }
+}
+
+window-rule {
+    // Solve space property manager
+    match title="Property Browser — SolveSpace"
+
+    default-column-width { proportion 0.25; }
+}
+
+
+// Example: block out two password managers from screen capture.
+// (This example rule is commented out with a "/-" in front.)
+/-window-rule {
+    match app-id=r#"^org\.keepassxc\.KeePassXC$"#
+    match app-id=r#"^org\.gnome\.World\.Secrets$"#
+
+    block-out-from "screen-capture"
+
+    // Use this instead if you want them visible on third-party screenshot tools.
+    // block-out-from "screencast"
+}
+
+// Example: enable rounded corners for all windows.
+// (This example rule is commented out with a "/-" in front.)
+window-rule {
+    geometry-corner-radius 12
+    clip-to-geometry true
+}
+
+binds {
+    // Keys consist of modifiers separated by + signs, followed by an XKB key name
+    // in the end. To find an XKB name for a particular key, you may use a program
+    // like wev.
+    //
+    // "Mod" is a special modifier equal to Super when running on a TTY, and to Alt
+    // when running as a winit window.
+    //
+    // Most actions that you can bind here can also be invoked programmatically with
+    // `niri msg action do-something`.
+
+    // Mod-Shift-/, which is usually the same as Mod-?,
+    // shows a list of important hotkeys.
+    Mod+Shift+Slash { show-hotkey-overlay; }
+
+    // Suggested binds for running programs: terminal, app launcher, screen locker.
+    Mod+T hotkey-overlay-title="Open a Terminal: wezterm" { spawn "wezterm"; }
+    Mod+D hotkey-overlay-title="Run an Application: cosmic-apps" { spawn "cosmic-app-library"; }
+    Mod+B hotkey-overlay-title="Open the Default Browser" { spawn "xdg-open" "http://"; }
+    Super+Alt+L hotkey-overlay-title="Lock the Screen: swaylock" { spawn "swaylock" "-f" "-i" "/usr/share/backgrounds/gnome/swoosh-l.jxl"; }
+
+    // toggle notification panel
+    Mod+Shift+N hotkey-overlay-title="Toggle notification window" { spawn "swaync-client" "-t"; }
+    // You can also use a shell. Do this if you need pipes, multiple commands, etc.
+    // Note: the entire command goes as a single argument in the end.
+    // Mod+T { spawn "bash" "-c" "notify-send hello && exec alacritty"; }
+
+    // Example volume keys mappings for PipeWire & WirePlumber.
+    // The allow-when-locked=true property makes them work even when the session is locked.
+    XF86AudioRaiseVolume allow-when-locked=true { spawn "wpctl" "set-volume" "@DEFAULT_AUDIO_SINK@" "0.1+"; }
+    XF86AudioLowerVolume allow-when-locked=true { spawn "wpctl" "set-volume" "@DEFAULT_AUDIO_SINK@" "0.1-"; }
+    XF86AudioMute        allow-when-locked=true { spawn "wpctl" "set-mute" "@DEFAULT_AUDIO_SINK@" "toggle"; }
+    XF86AudioMicMute     allow-when-locked=true { spawn "wpctl" "set-mute" "@DEFAULT_AUDIO_SOURCE@" "toggle"; }
+    XF86AudioPlay        allow-when-locked=true { spawn "playerctl" "play-pause"; }
+    XF86AudioPrev        allow-when-locked=true { spawn "playerctl" "previous"; }
+    XF86AudioNext        allow-when-locked=true { spawn "playerctl" "next"; }
+
+    // Open/close the Overview: a zoomed-out view of workspaces and windows.
+    // You can also move the mouse into the top-left hot corner,
+    // or do a four-finger swipe up on a touchpad.
+    Mod+O repeat=false { toggle-overview; }
+
+    Mod+Q { close-window; }
+
+    Mod+Left  { focus-column-left; }
+    // Mod+Down  { focus-window-down; }
+    // Mod+Up    { focus-window-up; }
+    Mod+Right { focus-column-right; }
+    Mod+H     { focus-column-left; }
+    // Mod+J     { focus-window-down; }
+    // Mod+K     { focus-window-up; }
+    Mod+L     { focus-column-right; }
+
+    Mod+Shift+Left  { move-column-left; }
+    // Mod+Shift+Down  { move-window-down; }
+    // Mod+Shift+Up    { move-window-up; }
+    Mod+Shift+Right { move-column-right; }
+    Mod+Shift+H     { move-column-left; }
+    // Mod+Shift+J     { move-window-down; }
+    // Mod+Shift+K     { move-window-up; }
+    Mod+Shift+L     { move-column-right; }
+
+    // Alternative commands that move across workspaces when reaching
+    // the first or last window in a column.
+    Mod+J     { focus-window-or-workspace-down; }
+    Mod+K     { focus-window-or-workspace-up; }
+    Mod+Down  { focus-window-or-workspace-down; }
+    Mod+Up    { focus-window-or-workspace-up; }
+    Mod+Shift+J     { move-window-down-or-to-workspace-down; }
+    Mod+Shift+K     { move-window-up-or-to-workspace-up; }
+    Mod+Shift+Down  { move-window-down-or-to-workspace-down; }
+    Mod+Shift+Up    { move-window-up-or-to-workspace-up; }
+
+    Mod+Home { focus-column-first; }
+    Mod+End  { focus-column-last; }
+    Mod+Ctrl+Home { move-column-to-first; }
+    Mod+Ctrl+End  { move-column-to-last; }
+
+    Mod+Ctrl+Left  { focus-monitor-left; }
+    Mod+Ctrl+Down  { focus-monitor-down; }
+    Mod+Ctrl+Up    { focus-monitor-up; }
+    Mod+Ctrl+Right { focus-monitor-right; }
+    Mod+Ctrl+H     { focus-monitor-left; }
+    Mod+Ctrl+J     { focus-monitor-down; }
+    Mod+Ctrl+K     { focus-monitor-up; }
+    Mod+Ctrl+L     { focus-monitor-right; }
+
+    Mod+Shift+Ctrl+Left  { move-column-to-monitor-left; }
+    Mod+Shift+Ctrl+Down  { move-column-to-monitor-down; }
+    Mod+Shift+Ctrl+Up    { move-column-to-monitor-up; }
+    Mod+Shift+Ctrl+Right { move-column-to-monitor-right; }
+    Mod+Shift+Ctrl+H     { move-column-to-monitor-left; }
+    Mod+Shift+Ctrl+J     { move-column-to-monitor-down; }
+    Mod+Shift+Ctrl+K     { move-column-to-monitor-up; }
+    Mod+Shift+Ctrl+L     { move-column-to-monitor-right; }
+
+    // Alternatively, there are commands to move just a single window:
+    // Mod+Shift+Ctrl+Left  { move-window-to-monitor-left; }
+    // ...
+
+    // And you can also move a whole workspace to another monitor:
+    // Mod+Shift+Ctrl+Left  { move-workspace-to-monitor-left; }
+    // ...
+
+    Mod+Page_Down      { focus-workspace-down; }
+    Mod+Page_Up        { focus-workspace-up; }
+    Mod+U              { focus-workspace-down; }
+    Mod+I              { focus-workspace-up; }
+    Mod+Ctrl+Page_Down { move-column-to-workspace-down; }
+    Mod+Ctrl+Page_Up   { move-column-to-workspace-up; }
+    Mod+Ctrl+U         { move-column-to-workspace-down; }
+    Mod+Ctrl+I         { move-column-to-workspace-up; }
+
+    // Alternatively, there are commands to move just a single window:
+    // Mod+Ctrl+Page_Down { move-window-to-workspace-down; }
+    // ...
+
+    Mod+Shift+Page_Down { move-workspace-down; }
+    Mod+Shift+Page_Up   { move-workspace-up; }
+    Mod+Shift+U         { move-workspace-down; }
+    Mod+Shift+I         { move-workspace-up; }
+
+    // You can bind mouse wheel scroll ticks using the following syntax.
+    // These binds will change direction based on the natural-scroll setting.
+    //
+    // To avoid scrolling through workspaces really fast, you can use
+    // the cooldown-ms property. The bind will be rate-limited to this value.
+    // You can set a cooldown on any bind, but it's most useful for the wheel.
+    Mod+WheelScrollDown      cooldown-ms=150 { focus-workspace-down; }
+    Mod+WheelScrollUp        cooldown-ms=150 { focus-workspace-up; }
+    Mod+Ctrl+WheelScrollDown cooldown-ms=150 { move-column-to-workspace-down; }
+    Mod+Ctrl+WheelScrollUp   cooldown-ms=150 { move-column-to-workspace-up; }
+
+    Mod+WheelScrollRight      { focus-column-right; }
+    Mod+WheelScrollLeft       { focus-column-left; }
+    Mod+Ctrl+WheelScrollRight { move-column-right; }
+    Mod+Ctrl+WheelScrollLeft  { move-column-left; }
+
+    // Usually scrolling up and down with Shift in applications results in
+    // horizontal scrolling; these binds replicate that.
+    Mod+Shift+WheelScrollDown      { focus-column-right; }
+    Mod+Shift+WheelScrollUp        { focus-column-left; }
+    Mod+Ctrl+Shift+WheelScrollDown { move-column-right; }
+    Mod+Ctrl+Shift+WheelScrollUp   { move-column-left; }
+
+    // Similarly, you can bind touchpad scroll "ticks".
+    // Touchpad scrolling is continuous, so for these binds it is split into
+    // discrete intervals.
+    // These binds are also affected by touchpad's natural-scroll, so these
+    // example binds are "inverted", since we have natural-scroll enabled for
+    // touchpads by default.
+    // Mod+TouchpadScrollDown { spawn "wpctl" "set-volume" "@DEFAULT_AUDIO_SINK@" "0.02+"; }
+    // Mod+TouchpadScrollUp   { spawn "wpctl" "set-volume" "@DEFAULT_AUDIO_SINK@" "0.02-"; }
+
+    // You can refer to workspaces by index. However, keep in mind that
+    // niri is a dynamic workspace system, so these commands are kind of
+    // "best effort". Trying to refer to a workspace index bigger than
+    // the current workspace count will instead refer to the bottommost
+    // (empty) workspace.
+    //
+    // For example, with 2 workspaces + 1 empty, indices 3, 4, 5 and so on
+    // will all refer to the 3rd workspace.
+    Mod+1 { focus-workspace 1; }
+    Mod+2 { focus-workspace 2; }
+    Mod+3 { focus-workspace 3; }
+    Mod+4 { focus-workspace 4; }
+    Mod+5 { focus-workspace 5; }
+    Mod+6 { focus-workspace 6; }
+    Mod+7 { focus-workspace 7; }
+    Mod+8 { focus-workspace 8; }
+    Mod+9 { focus-workspace 9; }
+    Mod+Shift+1 { move-column-to-workspace 1; }
+    Mod+Shift+2 { move-column-to-workspace 2; }
+    Mod+Shift+3 { move-column-to-workspace 3; }
+    Mod+Shift+4 { move-column-to-workspace 4; }
+    Mod+Shift+5 { move-column-to-workspace 5; }
+    Mod+Shift+6 { move-column-to-workspace 6; }
+    Mod+Shift+7 { move-column-to-workspace 7; }
+    Mod+Shift+8 { move-column-to-workspace 8; }
+    Mod+Shift+9 { move-column-to-workspace 9; }
+
+    // Alternatively, there are commands to move just a single window:
+    // Mod+Ctrl+1 { move-window-to-workspace 1; }
+
+    // Switches focus between the current and the previous workspace.
+    // Mod+Tab { focus-workspace-previous; }
+
+    // The following binds move the focused window in and out of a column.
+    // If the window is alone, they will consume it into the nearby column to the side.
+    // If the window is already in a column, they will expel it out.
+    Mod+BracketLeft  { consume-or-expel-window-left; }
+    Mod+BracketRight { consume-or-expel-window-right; }
+
+    // Consume one window from the right to the bottom of the focused column.
+    Mod+Comma  { consume-window-into-column; }
+    // Expel the bottom window from the focused column to the right.
+    Mod+Period { expel-window-from-column; }
+
+    Mod+R { switch-preset-column-width; }
+    Mod+Shift+R { switch-preset-window-height; }
+    Mod+Ctrl+R { reset-window-height; }
+    Mod+F { maximize-column; }
+    Mod+G { reset-window-height; }
+    Mod+Shift+F { fullscreen-window; }
+
+    // Expand the focused column to space not taken up by other fully visible columns.
+    // Makes the column "fill the rest of the space".
+    Mod+Ctrl+F { expand-column-to-available-width; }
+
+    Mod+C { center-column; }
+
+    // Center all fully visible columns on screen.
+    Super+Ctrl+C { center-visible-columns; }
+
+    // Finer width adjustments.
+    // This command can also:
+    // * set width in pixels: "1000"
+    // * adjust width in pixels: "-5" or "+5"
+    // * set width as a percentage of screen width: "25%"
+    // * adjust width as a percentage of screen width: "-10%" or "+10%"
+    // Pixel sizes use logical, or scaled, pixels. I.e. on an output with scale 2.0,
+    // set-column-width "100" will make the column occupy 200 physical screen pixels.
+    Mod+Minus { set-column-width "-2%"; }
+    Mod+Equal { set-column-width "+2%"; }
+
+    // Finer height adjustments when in column with other windows.
+    Mod+Shift+Minus { set-window-height "-2%"; }
+    Mod+Shift+Equal { set-window-height "+2%"; }
+
+    // Move the focused window between the floating and the tiling layout.
+    Mod+V       { toggle-window-floating; }
+    Mod+Shift+V { switch-focus-between-floating-and-tiling; }
+
+    // Toggle tabbed column display mode.
+    // Windows in this column will appear as vertical tabs,
+    // rather than stacked on top of each other.
+    Mod+W { toggle-column-tabbed-display; }
+
+    // Actions to switch layouts.
+    // Note: if you uncomment these, make sure you do NOT have
+    // a matching layout switch hotkey configured in xkb options above.
+    // Having both at once on the same hotkey will break the switching,
+    // since it will switch twice upon pressing the hotkey (once by xkb, once by niri).
+    // Mod+Space       { switch-layout "next"; }
+    // Mod+Shift+Space { switch-layout "prev"; }
+
+    Print { screenshot; }
+    Ctrl+Print { screenshot-screen; }
+    Alt+Print { screenshot-window; }
+
+    // Applications such as remote-desktop clients and software KVM switches may
+    // request that niri stops processing the keyboard shortcuts defined here
+    // so they may, for example, forward the key presses as-is to a remote machine.
+    // It's a good idea to bind an escape hatch to toggle the inhibitor,
+    // so a buggy application can't hold your session hostage.
+    //
+    // The allow-inhibiting=false property can be applied to other binds as well,
+    // which ensures niri always processes them, even when an inhibitor is active.
+    Mod+Escape allow-inhibiting=false { toggle-keyboard-shortcuts-inhibit; }
+
+    // The quit action will show a confirmation dialog to avoid accidental exits.
+    Mod+Shift+E { quit; }
+    Ctrl+Alt+Delete { quit; }
+
+    // Powers off the monitors. To turn them back on, do any input like
+    // moving the mouse or pressing any other key.
+    Mod+Shift+P { power-off-monitors; }
+}

niri/sway_startup

@@ -0,0 +1,12 @@
+#!/bin/bash
+
+background=$1
+blurred_bg=/tmp/blurred_"$(basename ${background})"
+
+echo "Setting background to ${background}"
+swaybg -m fill -i "$1" &
+
+echo "Convert ${background} to ${blurred_bg} and set swayidle"
+convert ${background} -blur 0x12 ${blurred_bg}
+swayidle -w timeout 601 "niri msg action power-off-monitors" timeout 600 "swaylock -f -i ${blurred_bg}" before-sleep "swaylock -f -i ${blurred_bg}" &
+

starship.toml

@@ -0,0 +1,208 @@
+# format = """
+# [ ](mauve)\
+# $os\
+# $username\
+# [](bg:teal fg:mauve)\
+# $hostname\
+# [](bg:maroon fg:teal)\
+# $directory\
+# [](fg:maroon bg:peach)\
+# $git_branch\
+# $git_status\
+# [](fg:peach bg:lavender)\
+# $c\
+# $elixir\
+# $elm\
+# $golang\
+# $gradle\
+# $haskell\
+# $java\
+# $julia\
+# $nodejs\
+# $nim\
+# $python\
+# $rust\
+# $scala\
+# $zig\
+# [](fg:lavender bg:sapphire)\
+# $time\
+# [ ](fg:sapphire)\
+# \n$character"""
+
+format="$username at $hostname in $directory $git_branch $git_status$package $all$os$time $character"
+
+# Disable the blank line at the start of the prompt
+# add_newline = false
+
+palette = "catppuccin_macchiato"
+
+# catppuccin macchiato
+[palettes.catppuccin_macchiato]
+rosewater = "#f4dbd6"
+flamingo = "#f0c6c6"
+pink = "#f5bde6"
+mauve = "#c6a0f6"
+red = "#ed8796"
+maroon = "#ee99a0"
+peach = "#f5a97f"
+yellow = "#eed49f"
+green = "#a6da95"
+teal = "#8bd5ca"
+sky = "#91d7e3"
+sapphire = "#7dc4e4"
+blue = "#8aadf4"
+lavender = "#b7bdf8"
+text = "#cad3f5"
+subtext1 = "#b8c0e0"
+subtext0 = "#a5adcb"
+overlay2 = "#939ab7"
+overlay1 = "#8087a2"
+overlay0 = "#6e738d"
+surface2 = "#5b6078"
+surface1 = "#494d64"
+surface0 = "#363a4f"
+base = "#24273a"
+mantle = "#1e2030"
+crust = "#181926"
+
+[os.symbols]
+Arch = " "
+Fedora = " "
+Ubuntu = " "
+Debian = " "
+Alpine = " "
+
+# You can also replace your username with a neat symbol like   or disable this
+# and use the os module below
+[username]
+show_always = true
+style_user = "mauve"
+style_root = "red"
+format = '[$user]($style)'
+disabled = false
+
+[hostname]
+ssh_only = false
+style = "teal"
+disabled = false
+format = '[$hostname]($style)'
+
+# An alternative to the username module which displays a symbol that
+# represents the current operating system
+[os]
+style = "blue"
+disabled = false # Disabled by default
+
+[directory]
+style = "maroon"
+format = "[$path]($style)"
+truncation_length = 3
+truncation_symbol = "…/"
+
+# Here is how you can shorten some long paths by text replacement
+# similar to mapped_locations in Oh My Posh:
+[directory.substitutions]
+"Documents" = "󰈙 "
+"Downloads" = " "
+"Music" = " "
+"Pictures" = " "
+"Development" = "󰈮"
+# Keep in mind that the order matters. For example:
+# "Important Documents" = " 󰈙 "
+# will not be replaced, because "Documents" was already substituted before.
+# So either put "Important Documents" before "Documents" or use the substituted version:
+# "Important 󰈙 " = " 󰈙 "
+
+[c]
+symbol = " "
+style = "lavender"
+# format = '[ $symbol ($version) ]($style)'
+
+[docker_context]
+symbol = " "
+style = "bg:#06969A"
+# format = '[ $symbol $context ]($style)'
+
+[elixir]
+symbol = " "
+style = "lavender"
+# format = '[ $symbol ($version) ]($style)'
+
+[elm]
+symbol = " "
+style = "lavender"
+# format = '[ $symbol ($version) ]($style)'
+
+[git_branch]
+symbol = ""
+style = "peach"
+format = '[$symbol $branch]($style)'
+
+[git_status]
+style = "peach"
+format = '[$all_status$ahead_behind]($style)'
+
+[golang]
+symbol = " "
+style = "lavender"
+# format = '[ $symbol ($version) ]($style)'
+
+[gradle]
+style = "lavender"
+# format = '[ $symbol ($version) ]($style)'
+
+[haskell]
+symbol = " "
+style = "lavender"
+# format = '[ $symbol ($version) ]($style)'
+
+[java]
+symbol = " "
+style = "lavender"
+# format = '[ $symbol ($version) ]($style)'
+
+[julia]
+symbol = " "
+style = "lavender"
+# format = '[ $symbol ($version) ]($style)'
+
+[nodejs]
+symbol = ""
+style = "lavender"
+# format = '[ $symbol ($version) ]($style)'
+
+[nim]
+symbol = "󰆥 "
+style = "lavender"
+# format = '[ $symbol ($version) ]($style)'
+
+[package]
+symbol = "󰏗 "
+style = "green"
+format = '[$symbol$version]($style)'
+
+[python]
+symbol = "󱔎 "
+style = "lavender"
+# format = '[ $symbol ($version) ($virtualenv) ]($style)'
+
+[rust]
+symbol = ""
+style = "lavender"
+# format = '[ $symbol ($version) ]($style)'
+
+[scala]
+symbol = " "
+style = "lavender"
+# format = '[ $symbol ($version) ]($style)'
+
+[zig]
+symbol = " "
+style = "lavender"
+# format = '[ $symbol ($version) ]($style)'
+
+[time]
+disabled = false
+time_format = "%R" # Hour:Minute Format
+style = "sapphire"
+format = '[$time]($style)'

themes/catppuccin-frappe/blue.ini

@@ -0,0 +1,12 @@
+[colors]
+background=303446dd
+text=c6d0f5ff
+prompt=b5bfe2ff
+placeholder=838ba7ff
+input=c6d0f5ff
+match=8caaeeff
+selection=626880ff
+selection-text=c6d0f5ff
+selection-match=8caaeeff
+counter=838ba7ff
+border=8caaeeff

themes/catppuccin-frappe/flamingo.ini

@@ -0,0 +1,12 @@
+[colors]
+background=303446dd
+text=c6d0f5ff
+prompt=b5bfe2ff
+placeholder=838ba7ff
+input=c6d0f5ff
+match=eebebeff
+selection=626880ff
+selection-text=c6d0f5ff
+selection-match=eebebeff
+counter=838ba7ff
+border=eebebeff

themes/catppuccin-frappe/green.ini

@@ -0,0 +1,12 @@
+[colors]
+background=303446dd
+text=c6d0f5ff
+prompt=b5bfe2ff
+placeholder=838ba7ff
+input=c6d0f5ff
+match=a6d189ff
+selection=626880ff
+selection-text=c6d0f5ff
+selection-match=a6d189ff
+counter=838ba7ff
+border=a6d189ff

themes/catppuccin-frappe/lavender.ini

@@ -0,0 +1,12 @@
+[colors]
+background=303446dd
+text=c6d0f5ff
+prompt=b5bfe2ff
+placeholder=838ba7ff
+input=c6d0f5ff
+match=babbf1ff
+selection=626880ff
+selection-text=c6d0f5ff
+selection-match=babbf1ff
+counter=838ba7ff
+border=babbf1ff

themes/catppuccin-frappe/maroon.ini

@@ -0,0 +1,12 @@
+[colors]
+background=303446dd
+text=c6d0f5ff
+prompt=b5bfe2ff
+placeholder=838ba7ff
+input=c6d0f5ff
+match=ea999cff
+selection=626880ff
+selection-text=c6d0f5ff
+selection-match=ea999cff
+counter=838ba7ff
+border=ea999cff

themes/catppuccin-frappe/mauve.ini

@@ -0,0 +1,12 @@
+[colors]
+background=303446dd
+text=c6d0f5ff
+prompt=b5bfe2ff
+placeholder=838ba7ff
+input=c6d0f5ff
+match=ca9ee6ff
+selection=626880ff
+selection-text=c6d0f5ff
+selection-match=ca9ee6ff
+counter=838ba7ff
+border=ca9ee6ff